HP 680689-001 manual Optical drive

Optical drive

NOTE: The optical drive spare part kit includes a bezel and bracket.

Description	Spare part number
BD ROM DVD±R/RW Super Multi Double-Layer Drive	659878-001
DVD±RW and CD-RW Super Multi Double-Layer Combo Drive	659877-001

Before removing the optical drive, follow these steps:

1.Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.

2.Disconnect all external devices connected to the computer.

3.Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer.

4.Remove the battery (see Battery on page 37).

Remove the optical drive:

1.Loosen the two captive screws (1) that secure the service door to the computer.

2.Lift the rear edge of the service door (2) up and forward until it rests at an angle.

3.Remove the service door. The service door is available in the Plastics Kit, spare part number 640216-001.

4.Remove the Phillips M2.5×4.0 screw (1) that secures the optical drive to the computer.

Component replacement procedures 39