Keyboard
Description | Spare part number |
|
|
For use in the United States, Black | |
|
|
For use in French Canada, Black | |
|
|
For use in the United States, White | |
|
|
For use in Latin America, White | |
|
|
Before removing the keyboard, remove the following components:
1.Battery (see Battery on page 41)
2.Service door (see Service door on page 42) Remove the keyboard:
1.Remove the Phillips 4.0 x 2.5 screw (1) in the WLAN module bay that secures the keyboard to the computer.
2.Using a thin,
3.Turn the computer
4.Open the computer as far as possible.
5.Lift the rear edge of the keyboard, and then tilt the keyboard forward onto the palm rest (1).
6.Release the zero insertion force (ZIF) connector (2) to which the keyboard cable is attached, and then disconnect the keyboard cable (3) from the system board.
Component replacement procedures | 51 |