8.Flex and lift up on the inside edges of the bezel on the left side (1), the top and bottom (2), and the right side (3) until the bezel disengages from the display back cover.
9.Remove the display bezel (4).
Reverse this procedure to install the display bezel.
10.To replace the webcam module, lift the webcam module as far from the display enclosure as the webcam module cable allows.
11.Disconnect the webcam module cable (1) from the webcam module, and then remove the webcam module (2). The webcam module is available using spare part number
Reverse this procedure to install the webcam module.
Component replacement procedures | 65 |