TouchPad button board
Description | Spare part number |
|
|
TouchPad button board (includes bracket and cable) | |
|
|
Before removing the TouchPad button board, remove the following components:
1.Battery (see Battery on page 41)
2.Service door (see Service door on page 42)
3.Hard drive (see Hard drive on page 43)
4.Optical drive (see Optical drive on page 45)
5.Keyboard (see Keyboard on page 51)
6.Top cover (see Top cover on page 53) Remove the TouchPad button board:
1.Release the ZIF connector (1) to which the TouchPad button board cable is attached, and then disconnect the cable (2) from the TouchPad.
2.Slide the TouchPad bracket to the left (3) and then remove it.
3.Remove the TouchPad button board (4).
Reverse the above procedure to reassemble and install the TouchPad button board.
Component replacement procedures | 59 |