HP 5103 manual Computer Setup in Suse Linux, Starting Computer Setup

Computer Setup in SUSE Linux

Starting Computer Setup

Computer Setup is a preinstalled, ROM-based utility that can be used even when the operating system is not working or will not load.

NOTE: Some of the Computer Setup menu items listed in this guide may not be supported by your computer.

NOTE: An external keyboard connected by USB can be used with Computer Setup only if USB legacy support is enabled.

To start Computer Setup, follow these steps:

1.Turn on or restart the computer, and then press esc while the “Press the ESC key for Startup Menu” message is displayed in the lower-left corner of the screen.

2.Press f10 to enter BIOS Setup.

Computer Setup menus

The menu tables in this section provide an overview of the Computer Setup options.

NOTE: Some of the Computer Setup menu items listed in this chapter may not be supported by your computer.

File menu

Select	To do this
System information	●	View identification information for the computer.
	● View specification information for the processor, cache
		and memory size, and system ROM.
Set system date and time	Change date and time
	●	Set date—MM:DD:YYYY
	●	Set time—HH:MM
System Diagnostics	●	F1—System information
	●	F2—Start-up test
	●	F3—Run-in test
	●	F4—Hard disk test
Restore defaults	Replace the configuration settings in Computer Setup with
	the original factory settings. (Password settings and security
	settings are not changed when you restore the factory
	settings.)
Reset BIOS security to factory default	Restore the BIOS security settings to the factory default.

94 Chapter 5 Computer Setup