HP 5103 manual Speaker, Remove the hard drive see Mass storage devices on

Speaker

Description	Spare part number
Speaker assembly with cable	577967-001

Before removing the speaker assembly:

1.Shut down the device. If you are unsure whether the device is off or in Hibernation, turn the device on, and then shut it down through the operating system.

2.Disconnect all external devices connected to the device.

3.Disconnect the power from the device by first disconnecting the power cord from the AC outlet and then disconnecting the AC adapter from the device.

4.Remove the battery (see Battery on page 38).

5.If your device has WWAN capability, remove the SIM (see SIM on page 39).

6.Remove the memory module (see Memory module on page 40).

7.Remove the keyboard (see Keyboard on page 43).

8.Remove the hard drive (see Mass storage devices on page 50).

9.Remove the top cover (see Top cover on page 56).

Remove the speaker assembly:

1.Turn the top cover upside down, with the front toward you.

2.Remove the 2 Phillips PM2.0×3.0 screws (1) that secure the assembly to the top cover, and remove the speaker assembly (2) from the top cover.

NOTE: If seated tight, work the speaker back and forth to release the speaker from the speaker alignment pins (3).

Reverse this procedure to install the speaker assembly.

Component replacement procedures 59