HP 5103 manual Security menu

Security menu

NOTE: Some of the menu items listed in this section may not be supported by your computer.

Select	To do this
Setup BIOS Administrator Password	Set up a BIOS administrator password.
Password Policy (requires a BIOS administrator password)	Revise password policy criteria.
HP SpareKey	Enable/disable HP SpareKey (enabled by default).
Always Prompt for HP SpareKey Enrollment	Enable/disable HP SpareKey enrollment (enabled by
	default).
Fingerprint Reset on Reboot (If Present)	Reset/clear the fingerprint reader ownership (select models
	only; disabled by default).
Change Password	Enter, change, or delete a BIOS administrator password.
HP SpareKey Enrollment	Enroll or reset HP SpareKey, which is a set of security
	questions and answers used if you forget your password.
DriveLock Passwords	● Enable/disable DriveLock on any computer hard drive
	(enabled by default).
	● Change a DriveLock user password or master
	password.
	NOTE: DriveLock settings are accessible only when you
	enter Computer Setup by turning on (not restarting) the
	computer.
Automatic DriveLock	Enable/disable Automatic DriveLock support.
TPM Embedded Security	Enable/disable support for Trusted Platform Module (TPM)
	Embedded Security, which protects the computer from
	unauthorized access to owner functions available in
	Embedded Security for ProtectTools. For more information,
	refer to the ProtectTools software Help.
	NOTE: You must have a setup password to change this
	setting.
Disk Sanitizer	Run Disk Sanitizer to destroy all existing data on the primary
	hard drive or the drive in the upgrade bay.
	CAUTION: If you run Disk Sanitizer, the data on the
	selected drive is destroyed permanently.
System IDs	Enter a user-defined computer asset tracking number and
	ownership tag.

Computer Setup in Windows Vista® 89