HP 5103 manual Mass storage devices, Description Spare part number

Mass storage devices

NOTE: Each hard drive spare part kit and solid state drive spare part kit includes a bracket and screws.

Description	Spare part number
Hard drive, 320-GB, 7200-RPM, for use with WWAN option	593643-001
Hard drive, 320-GB, 7200-RPM, SATA	577974-001
Hard drive, 250-GB, 7200-RPM, for use with WWAN option	593642-001
Hard drive, 250-GB, 7200-RPM, SATA	538972-001
Hard drive, 160-GB, 7200-RPM, for use with WWAN option	593641-001
Hard drive, 160-GB, 7200-RPM, SATA	577972-001
Solid state drive, 128-GB, SATA	606971-001
Solid state drive, 80-GB, SATA	583004-001

Before removing the hard drive or solid state drive:

1.Shut down the device. If you are unsure whether the device is off or in Hibernation, turn the device on, and then shut it down through the operating system.

2.Disconnect all external devices connected to the device.

3.Disconnect the power from the device by first disconnecting the power cord from the AC outlet and then disconnecting the AC adapter from the device.

4.Remove the battery (see Battery on page 38).

5.If your device has WWAN capability, remove the SIM (see SIM on page 39).

6.Remove the keyboard (see Keyboard on page 43).

To remove the hard drive or the solid state drive:

1.Loosen the Phillips PM2.5×10.0 captive screw (1), and remove the 2 Phillips PM2.0×3.0 screws (2) that secure the drive assembly to the base enclosure.

50 Chapter 4 Removal and replacement procedures