HP 5000C/CT manual Power Configuration, Setting Parameters Default Comments

Power Configuration

To implement the power management capabilities, the following settings are set by the user from the power setup screen.

Setting:	Parameters:	Default:	Comments:
Power Saving	Off/On	On	Enables power saving
			techniques.
Turn OFF	Disable/Time	3 minutes	How long the system will stay
	(1 - 30 minutes		in Run with (no activity). If
	or never)		disabled it will stay in Run.
Auto Save-to-	Disable/Time	1 day	How long the system will be in
disk	(6 hours to 7		off before the entire state of
	days or never)		the computer the suspend
			state. If disabled it will stay in
			the suspend state.
HDD power-	Disable/Time	3 minutes	HDD will turn off, system has
down	(1-30 minutes		ability to run. HDD will spin up
	or never)		when access required.
CPU power-	512ms-	2 sec	CPU clock rate will be reduce
down	8seconds		if the system has been idle for
			the selected delay. The clock
			rate will be restored when
			system activity is detected.

44