HP 5000C/CT manual Beep Code Description

Page 50

Beep Code

Description

 

 

none

CPU register test in progress or failure.

 

 

1-1-1

CPU Failure

 

 

1-1-3

CMOS write/read test in progress or failure. Failure will result in a system

 

halt.

 

 

1-1-4

ROM BIOS checksum test in progress or failure. Failure will result in a

 

system halt. Checksum test - All of the values in a given range of

 

locations are added together. The range includes a location which, when

 

added to sum of the ranges, will produce a known result (0). BIOS is in

 

FLASH and can only be fixed through replacement of the flash device (not

 

a field repairable item) Customer units should be returned for repair.

 

 

1-2-1

Programmable interval timer 0 test in progress or failure. Failure will

 

result in a system

 

 

1-2-2

DMA channel 0 address and count register test in progress or failure.

 

Failure will result in a system halt.

 

 

1-2-3

DMA page register write/read test in progress or failure. Failure will result

 

in a system halt.

 

 

1-3-1

RAM refresh verification test in progress or failure. Failure will result in a

 

system halt.

 

 

1-3-2

SMI RAM Bad. Failure will result in a system halt.

 

 

None

First 64K RAM test in progress. No specific test is performed - just

 

indicates that the test is beginning (i.e., no failure).

 

 

1-3-3

First 64K RAM chip or data line failure, multi-bit. Failure results in a

 

system halt.

 

 

1-4-2

Parity failure first 64K RAM. Failure results in a system halt.

 

 

2-1-1/2/3/4

First 64K RAM chip or data line failure on bit x. Failure results in a system

 

halt.

 

 

2-2-1/2/3/4

 

 

 

2-3-1/2/3/4

 

 

 

2-4-1/2/3/4

 

 

 

3-1-1

Slave DMA register test in progress or failure. Failure results in a system

 

halt.

 

 

3-1-2

Master DMA register test in progress or failure. Failure results in a system

 

halt.

 

 

50

Image 50
Contents HP OmniBook 5000C/CT Familiarization GuidePage Table of Contents Disk Configuration Table of Figures Memory Door and SlotOmniBook Product Comparisons Mass Storage HP OmniBook PowerRemovable Modules HP OmniBook Audio PortsSecurity Pre-installed SoftwareHP OmniBook Expandability Product Description Part Number OmniBook 5000 Series Product FeaturesModels Product Description Part Number Product Description Part Number Accessories Description Part Number OmniBook 5000 enhancements over the OmniBookBox SlotsPossible Memory Memory Slot Total RAM Configurations Hard Drive 540MB 810 MB 215MB HDD IBMFlexible disk drive Built-in I/OResolution Maximum colors Display/VideoUser interface Management standard Approx 16MB, VGA, DstnCharger Environment TestingOperating Storage environmentSystems Password DecodeSupported Operating Password Decode Policy Installing memory Field Replaceable AssembliesBattery Module and Floppy Disk Drive Module Hard Disk Drive Small parts Icon Assembly and Display Module HP Authorized Service Providers OnlyIcon Assembly Display Removal Palm Rest Assembly and Track Ball Assembly To replace, reverse the above procedure Keyboard Assembly and Power Board PCB Assy DC Power PI-DC Keyboard and Power BoardUpper Cover Assembly and Icon Board PCB Assy PI-ICON Components to remove prior to Upper CoverHeat Pipe Replacement Procedure CPU Module and Heat Sink HP Authorized Support Providers OnlyCPU Module and Heat Sink System Board PCB Assy PI-586 Standoff 11.75 mm Configuration and Setup Main Configuration ScreenPower Screen Power Control ScreenPower Configuration Setting Parameters Default CommentsSystem Configuration Input/Output Configuration COM1,COM4 IRQInput/Output Screen Disk Configuration First Post Beep Codes Troubleshooting and RepairOmniBook Self-Test Beep Code Description System halt Last Post Display CodesPhoenixBIOS Post Messages Power On Self Test Message Possible CausePOST. Pressing the Fl key allows the system to Appendix a Part Numbers Description HP Part Number Exchange PartSUB Battery SET

5000C/CT specifications

The HP 5000C/CT is a standout in the realm of color inkjet printers, particularly known for its remarkable performance in both office and high-quality graphic design settings. Launched by Hewlett-Packard, this model offers a robust suite of features catering to the needs of users who demand efficiency and superior output quality.

One of the primary characteristics of the HP 5000C/CT is its impressive print resolution. Boasting a maximum resolution of up to 1200 x 1200 dots per inch (dpi), this printer is capable of producing sharp and vibrant images. This resolution is critical for professionals in fields such as graphic design and photography, where color accuracy and detail are paramount.

Equipped with HP's advanced ColorSmart technology, the 5000C/CT ensures that color management is precise, resulting in consistent and true-to-life colors in every print. This technology also enhances the printer's ability to handle a variety of print media, including glossy photo paper, cardstock, and regular office paper, making it versatile for multiple applications.

The HP 5000C/CT features a user-friendly interface that simplifies operation, allowing users to easily navigate through print settings and configurations. With a print speed of up to 10 pages per minute (ppm) in color and 15 ppm in black and white, the printer is also equipped to meet the demands of busy offices where time efficiency is critical.

Connectivity is another highlight of the HP 5000C/CT. It supports USB and parallel connections, enabling seamless integration with a range of computers and networks. This is particularly beneficial in office environments where multiple users need to access the printer simultaneously.

Furthermore, the HP 5000C/CT utilizes separate ink cartridges for each color, which not only helps improve color fidelity but also reduces waste, as users can replace only the cartridges that run out. The ease of use in replacement and maintenance also contributes to lower overall operational costs.

Overall, the HP 5000C/CT is an exceptional choice for professionals seeking a reliable, high-quality color printer. Its blend of cutting-edge technology, user-friendly features, and impressive output capabilities positions it firmly as a valuable asset in any printing workflow. Whether in an office setting or a creative environment, the HP 5000C/CT delivers on quality and efficiency, making it a trusted choice among users.