HP NetServer NetRAID-4M Select the option to Use the following IP Address, DNS Server Leave blank

Page 18

HP NetRAID-4M Cluster Services Installation Guide

Hardware, Drivers and Utilities

17.From the General tab screen, de-select all components from the middle panel other than Internet Protocol (TCP/IP).

NOTE Microsoft recommends not installing the components: Client for Microsoft Networks, or File and Print Sharing for Microsoft Networks on the intra-cluster LAN.

18.Click on the Internet Protocol (TCP/IP) component and then click the Properties button.

19.Select the option to Use the following IP Address:.

20.Enter a private IP address. For example:

Server A:

10.1.1.1

Server B:

10.1.1.2

Subnet Mask:

255.0.0.0

DNS Server:

Leave blank

 

 

 

 

NOTE

The client LAN IP and heartbeat LAN IP addresses must be on different subnets.

 

 

The heartbeat LAN IP addresses on each node must be on the same subnet, and the

 

 

client LAN IP’s on each node must be on the same subnet.

 

 

 

21.Click the Advanced button.

22.Click the DNS tab. De-select the Register this connection’s addresses in DNS and the Use this connection’s DNS suffix in DNS registration option will become unavailable (gray out).

23.Click the Wins tab and select the Disable NetBIOS over IP option and then click OK.

14

Image 18
Contents November Warranty Contents Introduction Intended AudienceRecommended Reading Version History Software and Networking Requirements Installation Sequence Important NoteOverview Hardware RequirementsAlternative Installation Sequence On Server a B powered offNetRAID-4M Cluster Hardware Component Installation Create Installation Floppy Diskettes Install the NetRAID-4M and Heartbeat NIC Update the NetRAID-4M Firmware Connect the NetRAID-4M Scsi Cables Page Select the Controller Configuration option Set NetRAID-4M Bios OptionsSet Controller Configuration Options Set Scsi Configuration OptionsSelect Disk Utilities. Press Enter Install Windows 2000 DriversVerify disk drives are operational HP NetRAID-4M Disk Array Controller Driver\oemsetup.inf, click Next HP 10/100BaseT LAN Adapter D5013B NIC Driver Select the option to Use the following IP Address DNS Server Leave blankInstall the HP NetRAID-4M Fast Utility NetRAID-4M Installing Windows 2000 Cluster Services Server a Create Cluster Service User Account Server a Install Cluster Services Page Select the option The first node in the cluster, click Next Page Server a Install HP NetRAID-4M Cluster Add-on Software Page Server B Install Cluster Services Select the Second node in the cluster option and click NextServer B Install HP NetRAID-4M Cluster Add-on software Configure the Cluster Shared Quorum Using the NetRAID-4M Fast UtilityCreate Disksets Leave the options Attached and Re-initialize disk selected Create ContainersCreate Ntfs Partitions on shared storage Click Next at the Create a Partition wizard Create Shared Quorum Cluster Resource Page Assign the Shared Quorum to the cluster object Test the Shared Quorum Failover Remove the Local Quorum ResourcePage Expand Shared Storage for Cluster Services Create Shared Disksets, Containers and Ntfs Partitions From the Disk Physical Drv menu select Manage DisksetStarted from, until the initialization is complete Create NetRAID-4M Diskset Resources for Data Drives