HP NetServer NetRAID-4M manual Click Next at the Create a Partition wizard

Page 33

HP NetRAID-4M Cluster Services Installation Guide

Cluster Software Components and Quorum

22.Expand the view to see all disk space in the Disk Management screen. Right-click on the Unallocated Space representing the new container that appears in the window and select the Create a Partition option.

23.Click Next at the Create a Partition wizard.

24.Select the Primary partition option the click Next.

25.Accept the Maximum space option and then click Next.

NOTE Do not partition a disk into multiple partitions. Cluster Services software will only manage one partition per disk.

26.Assign a drive letter. Oftentimes Q is used to designate the Quorum; then click Next.

27.Select the NTFS format option and enter the volume name (e.g.: Quorum).

29

Image 33

Contents November Warranty Contents Introduction Intended AudienceRecommended Reading Version History Overview Installation Sequence Important NoteSoftware and Networking Requirements Hardware RequirementsOn Server a B powered off Alternative Installation SequenceNetRAID-4M Cluster Hardware Component Installation Create Installation Floppy Diskettes Install the NetRAID-4M and Heartbeat NIC Update the NetRAID-4M Firmware Connect the NetRAID-4M Scsi Cables Page Set Controller Configuration Options Set NetRAID-4M Bios OptionsSelect the Controller Configuration option Set Scsi Configuration OptionsVerify disk drives are operational Install Windows 2000 DriversSelect Disk Utilities. Press Enter HP NetRAID-4M Disk Array Controller Driver\oemsetup.inf, click Next HP 10/100BaseT LAN Adapter D5013B NIC Driver DNS Server Leave blank Select the option to Use the following IP AddressInstall the HP NetRAID-4M Fast Utility NetRAID-4M Installing Windows 2000 Cluster Services Server a Create Cluster Service User Account Server a Install Cluster Services Page Select the option The first node in the cluster, click Next Page Server a Install HP NetRAID-4M Cluster Add-on Software Page Select the Second node in the cluster option and click Next Server B Install Cluster ServicesServer B Install HP NetRAID-4M Cluster Add-on software Configure the Cluster Shared Quorum Using the NetRAID-4M Fast UtilityCreate Disksets Create Containers Leave the options Attached and Re-initialize disk selectedCreate Ntfs Partitions on shared storage Click Next at the Create a Partition wizard Create Shared Quorum Cluster Resource Page Assign the Shared Quorum to the cluster object Remove the Local Quorum Resource Test the Shared Quorum FailoverPage Expand Shared Storage for Cluster Services From the Disk Physical Drv menu select Manage Diskset Create Shared Disksets, Containers and Ntfs PartitionsStarted from, until the initialization is complete Create NetRAID-4M Diskset Resources for Data Drives