HP NetServer NetRAID-4M manual Server B Install Cluster Services

Page 28

HP NetRAID-4M Cluster Services Installation Guide

Cluster Software Components and Quorum

3.3Server B: Install Cluster Services

1.Log onto Server B.

2.Open the Control Panel screen and double-click on the Add/Remove Programs icon.

3.Click on the Add/Remove Windows Components and select the Cluster Service option. Click Next to continue.

4.Insert the Windows 2000 Advanced Server CD-ROM into the server CD-ROM drive. If the Windows 2000 Advanced Server splash screen appears, click Exit.

5.Click Next at the Welcome to the Cluster Service Configuration Wizard screen.

6.Click the I understand … option and then click Next.

7.Select the Second node in the cluster option and click Next.

8.Enter the cluster name. (Example: Cluster1)

9.Select the option to Connect to cluster as and enter the cluster service user name and password (e.g.: MSCS/password) and then click Next.

If an error appears saying that the username is not valid, go to Active Directory Users and Computers. Click on Users and if the user Cluster Service does not display, click Refresh. Verify that the Cluster Service username appears before returning to the next step.

10.Reenter the password and then click Next.

11.Click the Finish button to complete the installation on Server B.

12.Click OK to the message that the Cluster Services have successfully started.

13.Wait for the Cluster Service Installation wizard screen to return and then click Finish.

14.Click the Close button to close the Add/Remove Programs window and then close the Control Panel window.

15.Open the Cluster Administrator utility on Server B and you should now see both Server A and Server B in “Up” operational states as shown on the next page:

24

Page 27 Page 29
Image 28
Page 27 Page 29
Contents November Warranty Contents Intended Audience IntroductionRecommended Reading Version History Installation Sequence Important Note OverviewSoftware and Networking Requirements Hardware RequirementsAlternative Installation Sequence On Server a B powered offNetRAID-4M Cluster Hardware Component Installation Create Installation Floppy Diskettes Install the NetRAID-4M and Heartbeat NIC Update the NetRAID-4M Firmware Connect the NetRAID-4M Scsi Cables Page Set NetRAID-4M Bios Options Set Controller Configuration OptionsSelect the Controller Configuration option Set Scsi Configuration OptionsInstall Windows 2000 Drivers Verify disk drives are operationalSelect Disk Utilities. Press Enter HP NetRAID-4M Disk Array Controller Driver\oemsetup.inf, click Next HP 10/100BaseT LAN Adapter D5013B NIC Driver Select the option to Use the following IP Address DNS Server Leave blankInstall the HP NetRAID-4M Fast Utility NetRAID-4M Installing Windows 2000 Cluster Services Server a Create Cluster Service User Account Server a Install Cluster Services Page Select the option The first node in the cluster, click Next Page Server a Install HP NetRAID-4M Cluster Add-on Software Page Server B Install Cluster Services Select the Second node in the cluster option and click NextServer B Install HP NetRAID-4M Cluster Add-on software Using the NetRAID-4M Fast Utility Configure the Cluster Shared QuorumCreate Disksets Leave the options Attached and Re-initialize disk selected Create ContainersCreate Ntfs Partitions on shared storage Click Next at the Create a Partition wizard Create Shared Quorum Cluster Resource Page Assign the Shared Quorum to the cluster object Test the Shared Quorum Failover Remove the Local Quorum ResourcePage Expand Shared Storage for Cluster Services Create Shared Disksets, Containers and Ntfs Partitions From the Disk Physical Drv menu select Manage DisksetStarted from, until the initialization is complete Create NetRAID-4M Diskset Resources for Data Drives
Top Page Image Contents