HP ep7100 manual Using the on-screen menu, Adjusting the projector setup

Adjusting the projector

Adjusting the projector setup

1.Press menu, and go to Setup.

2.Set the setup adjustments as needed.

From the Setup menu, you can select settings, such as menu language, projector position, and menu timeout.

To get descriptions for all available setup adjustments, see “Setup menu” on page 41.

Using the on-screen menu

Changing settings using the on-screen menu

You can change the on-screen menu settings with the buttons on either the projector or the remote control.

1.Press menu on the projector or remote control. This displays the on-screen menu.

2.Press up or down to highlight the desired menu icon, then press right to move into that menu.

3.Press up or down to highlight that setting, then press ok to begin adjusting the setting.

4.Press left or right , or press up or down , to adjust the setting, as prompted.

5.Press ok to return to the menu.

6.To go to a different menu, press left and select a menu.

7.To close the on-screen menu, press menu.

If you do nothing for a period of time, the on-screen menu closes. To change the amount of time until the on-screen menu closes, press menu and select Setup >

Timeout for menu.

✎To exit from any on-screen menu or adjustment, press the menu button.

38 User’s Guide