HP ep7100 manual Showing video, Showing the video source, Hiding or showing the picture

Page 35

2

Showing video

Showing the video source

1.Be sure the video device is connected to the projector and turned on. See “Connecting a video source” on page 19.

2.Be sure the projector is set up, turned on, and adjusted. See “Making basic adjustments” on page 30.

3.Press the source button on the projector or remote control one or more times to select the input port where the device is connected.

4.Use the controls on the video device to start and control the show.

If you want to adjust the picture, see “Changing the picture mode” on page 32.

Hiding or showing the picture

1.Press the hide button on the projector or remote control to blank the picture and turn off the projector speakers. This does not affect the video source, which continues playing.

2.Press any button to show the picture again and turn on the projector speakers.

Showing a computer screen

If your projector has a DVI port, you can show the computer display on the screen.

1.Be sure the computer is connected to the projector and turned on. See “Connecting a computer” on page 27.

2.Be sure the projector is set up, turned on, and adjusted. See “Making basic adjustments” on page 30.

User’s Guide

35

Image 35
Contents HP ep7100 Series Home Cinema Digital Projector First Edition July Contents Showing video Index Contents Safety precautions Setting upWhat’s in the box? Identifying the contents of the box Identifying major components Identifying common featuresProjector at a glance Identifying the projector buttons and lights Projector buttons and lightsIdentifying back panel components Back panelRemote control Identifying features of the remote control AccessoriesPlanning your layout Setting up the projectorSetting up Image size diagonal Image size width Distance lens to screen Connecting power Connecting a video source Connecting a component-video source Connecting an S-video source Connecting a composite-video source Connecting a DVI source Connecting a Scart source Connecting a sound system Connecting several video sources Connecting a computer Turning the projector on Turning the projector on and offMoving the projector Turning the projector offAiming the projector Making basic adjustmentsSelecting a source Adjusting the focus and zoom Press menu and go to Picture Customize picture mode Changing the picture modeAdjusting the shape of the picture Adjusting the volume Adjusting a slanted pictureShowing a computer screen Showing videoShowing the video source Hiding or showing the pictureShowing video Adjusting the sound Adjusting the projectorAdjusting the picture and sound Adjusting the pictureChanging settings using the on-screen menu Using the on-screen menuAdjusting the projector setup Picture menu Input menuPicture menu Input menuSource or each viewing environment. You can also Help menu Setup menuSound menu Adjusting the projector Getting the projector status Cleaning the projector lensMaintaining the projector Replacing the lamp module requires special consideration Replacing the lamp moduleReplacing the battery in the remote control Maintaining the projector Installing on the ceiling Installing permanentlyInstalling the projector Installing on a tableSerial connections Connecting to a room controllerExamples of room controller commands Request *BRT=65CR Notification Room controller commandsCspc Hide Lhrs Shdn Menu Installing permanently If both red warning lights are blinking Fixing problemsTroubleshooting suggestions If the red temperature light is on or blinkingPicture problems Start-up problemsIf the image has slanted sides If the image is out of focusIf an upside-down or reversed image is displayed If the image is too small or too largeIf the projected colors seem completely wrong If the image is stretchedIf the projected colors seem slightly wrong If no sound is coming out of the projector Sound problemsIf a computer display is projected with low resolution If the image disappears from the computer screenRemote control problems Interruption problemsPress menu and go to Help Diagnostics Testing the projectorFixing problems Contacting HP support Support and warrantySupport Americas Obtaining HP repair Limited warrantyHP digital projector limited warranty statement Extent of limited warrantyLimitations of liability Limitations of warrantyLocal law Support and warranty Reference SpecificationsProjector specifications Operating Compatibility Resolution Refresh rates Hz Analog Video mode compatibilityRegulatory information Safety informationLED safety Mercury safetyConnections to peripheral devices CanadaJapan Korea International Declaration of conformity Reference Index Index Index Index Page 5990-3663
Related manuals
Manual 85 pages 38.24 Kb