HP ep7100 manual Declaration of conformity

Page 77

Reference

Declaration of conformity

According to ISO/IEC Guide 22 and EN 45014

Manufacturer's name:

Hewlett Packard Company

Manufacturer's address:

Hewlett Packard Company

 

Digital Projection & Imaging

 

1000 NE Circle Blvd.

Declares, that the product(s):

Corvallis, OR 97330-4239

 

Product name:

Home Cinema

Model numbers:

ep7110/ep7120 series

Regulatory model:

CRVSB-04DY

Conforms to the following product specifications:

Safety: IEC 60950:1999/ EN 60950:2000

IEC 60825-1:1993 +A1 / EN 60825-1:1994 +A11 Class 1 LED

GB4943-1995

EMC: EN 55022: 1998 Class B [1]

CISPR 24:1997 / EN 55024: 1998

IEC 61000-3-2:1995 / EN 61000-3-2:2000

IEC 61000-3-3:1994 / EN 61000-3-3:1995+A1:2001

GB9254-1998

FCC Title 47 CFR, Part 15 Class B/ANSI C63.4:1992

AS/NZS 3548:1995 Rules and Regulations of Class B

Supplementary information:

The product herewith complies with the requirements of following Directives and carries the CE marking accordingly:

-Low Voltage Directive: 73/23/EEC

-EMC Directive: 89/336/EEC

[1]The product was tested in a typical configuration with Hewlett Packard Personal Computer peripherals.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Corvallis, Oregon, July 1, 2004

Steve Brown, General Manager European Contact for regulatory topics only: Hewlett Packard GmbH, HQ-TRE, Herrenberger Straße 140, 71034 Boeblingen, Germany. (FAX:+49-7031-143143).

USA Contact: Hewlett Packard Co., Corporate Product Regulations Manager, 3000 Hanover

Street, Palo Alto, CA 94304. Phone: (650) 857-1501.

User’s Guide

77

Image 77
Contents HP ep7100 Series Home Cinema Digital Projector First Edition July Contents Showing video Index Contents Safety precautions Setting upWhat’s in the box? Identifying the contents of the box Identifying major components Identifying common featuresProjector at a glance Identifying the projector buttons and lights Projector buttons and lightsIdentifying back panel components Back panelRemote control Identifying features of the remote control AccessoriesPlanning your layout Setting up the projectorSetting up Image size diagonal Image size width Distance lens to screen Connecting power Connecting a video source Connecting a component-video source Connecting an S-video source Connecting a composite-video source Connecting a DVI source Connecting a Scart source Connecting a sound system Connecting several video sources Connecting a computer Turning the projector on Turning the projector on and offMoving the projector Turning the projector offAiming the projector Making basic adjustmentsSelecting a source Adjusting the focus and zoom Press menu and go to Picture Customize picture mode Changing the picture modeAdjusting the shape of the picture Adjusting the volume Adjusting a slanted pictureShowing the video source Showing videoHiding or showing the picture Showing a computer screenShowing video Adjusting the picture and sound Adjusting the projectorAdjusting the picture Adjusting the soundChanging settings using the on-screen menu Using the on-screen menuAdjusting the projector setup Picture menu Input menuInput menu Picture menuSource or each viewing environment. You can also Help menu Setup menuSound menu Adjusting the projector Getting the projector status Cleaning the projector lensMaintaining the projector Replacing the lamp module requires special consideration Replacing the lamp moduleReplacing the battery in the remote control Maintaining the projector Installing the projector Installing permanentlyInstalling on a table Installing on the ceilingSerial connections Connecting to a room controllerExamples of room controller commands Request *BRT=65CR Notification Room controller commandsCspc Hide Lhrs Shdn Menu Installing permanently Troubleshooting suggestions Fixing problemsIf the red temperature light is on or blinking If both red warning lights are blinkingPicture problems Start-up problemsIf an upside-down or reversed image is displayed If the image is out of focusIf the image is too small or too large If the image has slanted sidesIf the projected colors seem completely wrong If the image is stretchedIf the projected colors seem slightly wrong If a computer display is projected with low resolution Sound problemsIf the image disappears from the computer screen If no sound is coming out of the projectorRemote control problems Interruption problemsPress menu and go to Help Diagnostics Testing the projectorFixing problems Contacting HP support Support and warrantySupport Americas HP digital projector limited warranty statement Limited warrantyExtent of limited warranty Obtaining HP repairLimitations of liability Limitations of warrantyLocal law Support and warranty Reference SpecificationsProjector specifications Operating Compatibility Resolution Refresh rates Hz Analog Video mode compatibilityLED safety Safety informationMercury safety Regulatory informationConnections to peripheral devices CanadaJapan Korea International Declaration of conformity Reference Index Index Index Index Page 5990-3663