Plantronics CS55 Series setup guide Speaker Ear Loop, Headband

Page 3

STEP1&ATTACHADJUSTHEADBANDFIT

Snap the speaker of the headset into the retaining ring of the headband or one of the three ear loops provided. See below.

Speaker

Headset

If you will be wearing the headband, adjust the band for the most comfortable fit. See 1 below.

1 1

For either wearing option, rotate the headset in the retaining ring until the microphone is pointed toward your mouth. See 2 above.

Questions? For fast, efficient Technical Support call: 800-544-4660 Ext. 5538 3

Image 3

Contents CS55 Headset Base Base Power Adapter HL10 Automatic Handset LifterCS55 Package Contents Headband Speaker Ear LoopHandset 2CONNECT Base to Desk PhoneHandset port or Headset port? Configuration BBase Power Adapter 3CONNECT Power and Charge HeadsetConnect Headset Base to power outlet Charge the Headset for at least 20 Minutes before usingInstall Automatic Handset Lifter Connect Handset Lifter power cord to Headset BaseAutomatic Handset Lifter Use the Extender Arm to Stabilize Handset if needed Determine Lifter position and height settingMount the Lifter in permanent position Confi guration Dial Position IndicatorUsing Your CS55 Headset System Powering up the HeadsetTo Place, Answer, or End Calls Mute control Set Listening VolumeSet Speaking Volume To Mute a CallTo set the IntelliStandTM Feature Speaking Volume Minor Adjustment ControlIntelliStand Switch Base Status Indicator LightsTalking/Muted Green Power RED Charging Amber CS55 Lights and TonesSubscription System ResetAdditional Information and Support Troubleshooting and Common QuestionsBattery replacement Still having problems?Plantronics Limited Warranty Maintenance