Plantronics CS55 Series setup guide Configuration B, Handset port or Headset port?

Page 5

Use Configuration B if:

You will NOT use the Automatic Handset Lifter and…

Your phone has built-in headset functionality (a Headset button).

Configuration B

Confirm there is

a “HEADSET” button on your phone

Headset Base (bottom view)

1. Plug the short BLACK Phone Cable that is pre-installed on the Headset Base into the Headset port [C] on the desk phone.

HANDSET port or HEADSET port?

You should only use the headset port if you will NOT be using the Automatic Handset Lifter AND you have a pre-programmed Headset button on your phone.

In this configuration you MUST press both the Headset button on your phone and the Call Control Button on the headset to answer/end calls.

Questions? For fast, efficient Technical Support call: 800-544-4660 Ext. 5538 5

Image 5

Contents CS55 Headset Base Base Power Adapter HL10 Automatic Handset LifterCS55 Package Contents Headband Speaker Ear LoopHandset 2CONNECT Base to Desk PhoneHandset port or Headset port? Configuration BConnect Headset Base to power outlet 3CONNECT Power and Charge HeadsetCharge the Headset for at least 20 Minutes before using Base Power AdapterAutomatic Handset Lifter Install Automatic Handset LifterConnect Handset Lifter power cord to Headset Base Use the Extender Arm to Stabilize Handset if needed Determine Lifter position and height settingMount the Lifter in permanent position Confi guration Dial Position IndicatorTo Place, Answer, or End Calls Using Your CS55 Headset SystemPowering up the Headset Set Speaking Volume Set Listening VolumeTo Mute a Call Mute controlIntelliStand Switch To set the IntelliStandTM FeatureSpeaking Volume Minor Adjustment Control Talking/Muted Green Power RED Charging Amber Indicator LightsCS55 Lights and Tones Base StatusSubscription System ResetAdditional Information and Support Troubleshooting and Common QuestionsPlantronics Limited Warranty Still having problems?Maintenance Battery replacement