Plantronics CS55 Series setup guide Determine Lifter position and height setting

Page 8

B. Determine Lifter position and height setting

1. Set the Lifter Height Switch to the lowest setting.

Handset Lifter Arm

	Lifter viewed	Start with Lifter
	from back	Start with Lifter
	from back	Height Switch in
		Height Switch in
		lowest position

2. While wearing your headset, slide the Handset Lifter Arm under the handset until the lifter base touches the side of the phone.

3.Slide the Lifter up to where it nearly touches the handset earpiece.

Slide Lifter under handset, then up toward the ear piece

Use the Extender Arm to Stabilize

Handset (if needed)

If your handset falls off the phone base or does not return to its cradle when lowered, you will need to attach the Extender Arm to the Lifter as described in the HL10 Additional Parts Kit.

8Plantronics CS55 Setup Guide

Image 8

Contents Base Power Adapter HL10 Automatic Handset Lifter CS55 Headset BaseCS55 Package Contents Speaker Ear Loop Headband2CONNECT Base to Desk Phone HandsetConfiguration B Handset port or Headset port?3CONNECT Power and Charge Headset Connect Headset Base to power outletCharge the Headset for at least 20 Minutes before using Base Power AdapterAutomatic Handset Lifter Install Automatic Handset LifterConnect Handset Lifter power cord to Headset Base Determine Lifter position and height setting Use the Extender Arm to Stabilize Handset if neededConfi guration Dial Position Indicator Mount the Lifter in permanent positionTo Place, Answer, or End Calls Using Your CS55 Headset SystemPowering up the Headset Set Listening Volume Set Speaking VolumeTo Mute a Call Mute controlIntelliStand Switch To set the IntelliStandTM FeatureSpeaking Volume Minor Adjustment Control Indicator Lights Talking/Muted Green Power RED Charging AmberCS55 Lights and Tones Base StatusSystem Reset SubscriptionTroubleshooting and Common Questions Additional Information and SupportStill having problems? Plantronics Limited WarrantyMaintenance Battery replacement