Plantronics CS55 Series setup guide Mount the Lifter in permanent position

Page 9

4.Press the Call Control Button on the headset. This will activate the Handset Lifter and lift the handset from the phone.

If you hear a dial tone, the lifter height is set correctly and needs no adjustment. Please continue with the next section “Mount the Lifter in permanent position”

on the following page.

Press Call

Control Button

5.If you do not hear a dial tone, the Lifter may not be raising the handset high enough OR the Configuration Dial may need adjusting. Continue to step 6.

6. Check the Lifter height adjustment by moving the Lifter Height Switch to a higher position. Repeat steps 2 through 4 as necessary.

If you hear a dial tone, the lifter height is now set correctly. Please continue with the next section “Mount the Lifter in Permanent Position”.

7. If you still cannot hear a dial tone, you will need to change the setting

on the Configuration Dial. Using a coin or paperclip, turn the Configuration Dial to a different setting until you hear a dial tone.

To view an interactive quick start guide online, visit www.plantronics.com/CS55.

Confi guration

Dial

Position Indicator

Multiple settings might work with your phone; however, only one is the optimal position.

If you still cannot hear a dial tone, please call Technical Support at 800-544-4660 Extension 5538.

C. Mount the Lifter in permanent position

1. Remove the protective strips from the three mounting tapes on the underside of the Lifter.

2. GENTLY place the Lifter on the desk phone in the optimum position as determined above. Test the Lifter to verify positioning by pressing the Call Control Button on your headset to activate the Lifter and listen for a dial tone.

3. Press FIRMLY to adhere the Lifter to the desk phone.

Questions? For fast, efficient Technical Support call: 800-544-4660 Ext. 5538 9

Image 9
Contents CS55 Headset Base Base Power Adapter HL10 Automatic Handset LifterCS55 Package Contents Headband Speaker Ear LoopHandset 2CONNECT Base to Desk PhoneHandset port or Headset port? Configuration BConnect Headset Base to power outlet 3CONNECT Power and Charge HeadsetCharge the Headset for at least 20 Minutes before using Base Power AdapterInstall Automatic Handset Lifter Connect Handset Lifter power cord to Headset BaseAutomatic Handset Lifter Use the Extender Arm to Stabilize Handset if needed Determine Lifter position and height settingMount the Lifter in permanent position Confi guration Dial Position IndicatorUsing Your CS55 Headset System Powering up the HeadsetTo Place, Answer, or End Calls Set Speaking Volume Set Listening VolumeTo Mute a Call Mute controlTo set the IntelliStandTM Feature Speaking Volume Minor Adjustment ControlIntelliStand Switch Talking/Muted Green Power RED Charging Amber Indicator LightsCS55 Lights and Tones Base StatusSubscription System ResetAdditional Information and Support Troubleshooting and Common QuestionsPlantronics Limited Warranty Still having problems?Maintenance Battery replacement