HP 620 manual Appendix B Camera dock

Appendix B: Camera dock

NOTE The Camera Dock does not work without AC power. Be sure to use ONLY the HP AC adapter and the cables that came with the Camera Dock.

1Follow the setup instructions provided with the HP Camera Dock. This includes installing the camera Dock Insert onto the dock, inserting rechargeable batteries in the camera, connecting the AC power source, and connecting the Camera Dock to a computer, printer, and/or TV.

2 Make sure your camera is set up correctly and remove any cables that might be attached to it before putting it in the dock.

3 Place the camera in the HP Camera Dock with the rear of the camera facing the front of the Camera Dock.

The Camera Dock has three I/O connectors on the back:

—Connects to the TV

—Connects directly to HP USB

DeskJet and Photosmart printers

—Connects to your computer

There is a sliding door over the computer and printer connectors that

prevents you from using both connectors at the same time (the Camera Dock is not a USB hub).

Appendix B: Camera dock 65