To connect the camera to a Windows computer
1Make sure the camera is turned off.
2Plug the smaller end of the USB cable into the camera.
3Plug the flat end of the cable into any USB port on your computer.
Note | When the camera is connected to your computer, | |
| only the | switch operates. The other |
| camera buttons do not respond. |
Unloading images to a Windows computer
Unloading is the process of copying images from the camera’s memory to your computer. If you have a CF memory card installed in the camera, images will be copied from the CF memory card to the computer.
You can unload images from your camera in one of three ways: automatically, manually, or by mounting the camera as a disk drive. The automatic unload procedure is the preferred method. For descriptions of the other methods, see the online documentation with the HP Photo Imaging software.
Tip | To conserve battery power, you can use an AC |
| adapter (optional) when you are unloading images |
| to your computer. |
|
|
To unload images automatically
1Connect the camera to your computer using the USB cable.
2Turn the camera on.
32 | HP photosmart 318 User Guide |