Problem | Possible cause Solution |
The computer | The camera is not |
does not | configured correctly |
recognize the | for the type of |
camera and | computer you have. |
the automatic |
|
image unload |
|
does not |
|
start. |
|
Open the Setup menu and check the PC Connect Mode setting:
•If you are using a Windows computer, make sure PC Connect Mode is set to Digital Camera.
•If you are using a Macintosh computer, make sure PC Connect Mode is set to Disk Drive.
| You have not taken | When you unload images to your |
| any new pictures | computer, the images are still stored in |
| since the last time | the camera until you delete them. If you |
| you unloaded | take new pictures and then unload |
| images to your | images again, the automatic unload |
| computer. | software ignores the old images. If you |
|
| have no new images in your camera |
|
| when you connect it to the computer, the |
|
| automatic unload does not take place. |
|
|
|
| Your Macintosh | Go to the Support section of |
| computer has an | www.apple.com and download the USB |
| older version of OS | Mass Storage Support (version 1.3.5) |
| 8.6, which does not | update. |
| support USB mass |
|
| storage. |
|
|
|
|
Error messages
If an error message appears on the image display, try one of the following solutions.
Error | Possible cause | Solution |
message |
|
|
|
|
|
BAD CF CARD! | The CF memory card is | Reformat the CF memory |
| damaged. | card or replace the card. |
BATTERIES ARE | Power in the batteries is |
TOO LOW FOR | insufficient for you to |
LIVE VIEW | preview your pictures. |
| However, you can take |
| pictures or review your |
| images. |
Press the button to turn the image display off and use the viewfinder to frame your pictures.
60 | HP photosmart 318 User Guide |