HP 318 manual Wrong, Date and/or, Time is, Shown, Incorrect, Language is, Set on

Page 65

Problem

Possible cause

Solution

 

 

 

 

The NiMH batteries

You must recharge all four NiMH

 

you are using were

batteries after fully draining them four

 

recharged

times for the batteries to reach their

 

incorrectly.

optimum capacity and performance.

The wrong

The batteries were

date and/or

dead or were

time is

removed from the

shown.

camera for more

 

than 10 minutes.

Replace the batteries and then reset the date and time using the camera menus. To avoid losing date and time information, replace low batteries promptly.

The incorrect

The wrong language

Change the camera language by using

language is

was selected when

the camera’s Setup menu.

set on the

you started the

 

camera.

camera the first

 

 

time.

 

A long delay

The camera is still

occurs after I

saving the last

press the

picture you took.

shutter button

 

before the

 

camera takes

 

a picture.

 

Wait a few seconds for the camera to finish processing the image, and then press the SHUTTER button halfway down. When a steady green light appears next to the viewfinder, the camera is ready to take another picture.

The flash is

Wait until the flash icon on the status

recharging.

LCD stops blinking before taking another

 

flash picture.

The light is low and the flash is turned off.

In dim light the camera requires a longer exposure. Either hold the camera very steady until it takes the picture; or improve the lighting conditions or use the flash.

A red light

Space in memory is

appears next

insufficient for the

to the

picture. (The status

viewfinder

LCD shows “0”

when I press

images remaining.)

the shutter

 

button.

 

Make room in memory by deleting or unloading images, or select a lower image quality setting.

If you do not have a CF memory card installed, installing one will give you room for more images. If you have a CF memory card, remove it and see if you have room in internal memory (the status LCD shows a number other than 0), or install a new CF memory card. For more information, see “Installing a CF memory card” on page 44.

Troubleshooting, support, and warranties

57

Image 65
Contents Page Page User guide Trademark and copyright information Table of Contents Sharing and printing images Appendix a Reference Table of ContentsHP photosmart 318 User Guide Getting started Getting startedCamera parts Self-timer button Level Indicator Attach the wrist strap Quick setupInstall the batteries Choose the camera language Turn the camera onSet the camera date and time Automatic power-offTo navigate the menus Using the control dialTo review your images Exit Storing images on a CF memory cardTo exit a menu without making a selection, select HP photosmart 318 User Guide Taking a picture Taking picturesTip Taking picturesUsing focus lock Using automatic focus and automatic exposureTo preview a picture Previewing your picturesTips for taking the best pictures Conditions Examples of subjects HP photosmart 318 User Guide Reviewing your images Reviewing your imagesViewing your images Creating a print order To create or edit a print order Format Memory or Format CF Card if a CF Deleting your imagesTo delete images Magnifying your images Viewing small versions thumbnails of your imagesTo look at thumbnails of your images To magnify an imageHP photosmart 318 User Guide Adjusting the camera settings Adjusting the camera settingsUsing the flash Icon Message Description To change the flash settingChanging the image quality Image quality Description ResolutionTo change the image quality Using the digital zoomTo use the digital zoom Using the self-timerTo use the self-timer To set the date and time Setting the date and timeChanging the camera language Setting the welcome screenTo set the camera language To change the image on the welcome screenHP photosmart 318 User Guide Sharing and printing images Sharing and printing imagesPhotosmart Using the camera with a Windows computerSystem requirements for a Windows computer To install the bonus software Installing the software on a Windows computerConnecting the camera to a Windows computer To unload images automatically Unloading images to a Windows computerTo connect the camera to a Windows computer To use an HP printer that has a memory card slot Using the camera with a Windows NT 4.0 computerTo use a memory card reader System requirements for a Macintosh computer Using the camera with a Macintosh computerChanging the PC Connect Mode setting Connecting the camera to a Macintosh computer Installing the software on a Macintosh computerTo connect the camera to a Macintosh computer Unloading images to a Macintosh computerTo automatically unload images to a Macintosh computer Tips for unloading images to a Macintosh computerTo unload images to a Windows or Macintosh computer Unloading images without using the softwarePrinting images without a computer Using a card readerStoring images in memory Storing images in memoryDetermining the number of pictures you can take Using a CF memory card To install a CF memory card Installing a CF memory cardChecking the CF memory card status To copy images from internal memory to a CF memory card CF memory cardTo format internal memory or a CF memory card Formatting memoryHP photosmart 318 User Guide Powering your camera Powering and maintaining your cameraPowering and maintaining your camera Determining if the batteries need to be changedFull Partially-charged Empty To insert new batteries Replacing batteriesSupport Using an AC power adapterTo connect an AC power adapter Memory cards Caring for your camera and accessoriesCamera Safety precautions Problem Possible cause Solution Problems and solutionsTroubleshooting, support, and warranties CameraPress a Does notButton ReplaceDate and/or WrongTime is ShownHalfway down Too bright My image isToo dark Error Possible cause Solution Message Error messagesComputer Camera is not Does not Recognize For the type CameraCF Card Visiting HP Web sites Getting assistanceVisiting related Web sites HP product support HP photosmart Web siteObtaining support within the United States Contacting HP Customer SupportObtaining support worldwide Upgraded warranty optionsArgentina Australia AustriaBrazil BelgiumCanada ChileMiddle East/Africa MexicoNetherlands New ZealandHP product Duration of limited warranty Hewlett-Packard limited warranty statementHardware repair services Appendix a Reference Symbols on the status LCDIcon Meaning Appendix a ReferenceIcon Meaning Indicator light State Meaning Camera indicator lightsCamera specifications Index IndexNumerics Help. See customer support holding the camera Index HP photosmart 318 User Guide Index Updates for drivers Page C8900−90029