Toshiba RAV-SP1400UT-E, RAV-SP560AT-E, RAV-SP1100AT-E, RAV-SP800AT-E Single unitIn installation

Page 21

Installation Place

A place which provides a specified space around the outdoor unit.

A place where the operation noise and discharged air are not given to your neighbors.

A place that is not exposed to a strong wind.

A place that does not block a passage.

When the outdoor unit is installed in an elevated position, be sure to secure its feet.

There must be sufficient space for carrying in the unit.

A place where the drain water does not make any problem.

CAUTION

1.Install the outdoor unit at a place where dis- charge air is not blocked.

2.When an outdoor unit is installed in a place that is always exposed to a strong wind like a coast or on a high storey of a building, secure a normal fan operation by using a duct or a wind shield.

3.When installing the outdoor unit in a place that is constantly exposed to a strong wind such as the upper stairs or rooftop of a building, apply the windproof measures referring to the following examples.

1)Install the unit so that its discharge port faces to the wall of the building. Keep a distance 500 mm or more between the unit and the

wall surface.

2)Supposing the wind direction during the operation season of the air conditioner, install the unit so that the discharge port is set at right angle to the wind direction.

Strong wind

Strong wind

4.Installation in the following places may result in some troubles. Do not install the unit in such places below.

A place full of machine oil.

A place full of sulphuric gas.

A place where high-frequency radio waves are likely to be generated as from audio quipment, welders, and medical equipment.

Necessary Space for Installation

Obstacle at rear side

<Upper side is free>

1. Single unit installation

150 or more

2. Obstacles at both right and left sides.

200 ormore

obstacle should be

 

The height of the

 

lower than the height

 

of the outdoor unit.

150

300

or more

or more

3. Serial installation of two or more units

200 or more

150

300

300

300

or more

or more

or more

or more

The height of the obstacle should be lower than the height of the outdoor unit.

<Obstacle also at the upper side>

500 ormore

150

or more

 

Obstacle at front side

<Upper side is free>

1.

Single unitIn installation

 

500 moreor

 

 

 

 

 

 

 

2.

Serial installation of two or more units

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1000 or more

53

Image 21
Contents Split Type Adoption of NEW Refrigerant Indoor Unit 4-Way Air Discharge Cassette Type Precautions for Safety New Refrigerant Air Conditioner InstallationTo Disconnect the Appliance from Main Power Supply Accessory and Installation Parts Refrigerant Piping Accessory and RefrigerantBefore installation Selection of InstallationNecessary Space for Installation Installation PlaceObstacle at rear side Upper side is free Obstacle at front side Upper side is freeInstallation of Outdoor Unit Refrigerant Piping Connection Optional Installation Parts Local ProcureFor Reference Piping connectionKnockout procedure How to remove the front panelKnockout of Pipe Cover Pipe Forming/End Positioning Refrigerant PipingFlaring size a Unit mm Projection margin in flaring B Unit mm FlaringDo not apply refrigerating machine oil to the flared surface Tightening of Connecting PartEvacuating Air PurgeVacuum pump Evacuating How to open the valveHow to wire SM560AT-E How to remove the valve coverStripping length power cord and connecting cable Electrical WorkFinal Installation Checks Check and Test OperationSelf-Diagnosis by LED Indication New tools for R410A Changes in the product and componentsPrecautions for Safety Accessory and Installation Parts SP1100AT-E, SP1400AT-E only SP1100AT-E, SP1400AT-ELength of refrigerant pipe SM1100AT-E, SM1400AT-E Single unitIn installation Moreor Liquid side Gas side Outer diameter Thickness Ø9.5 Ø15.9 Rigid Clutch type Projection margin in flaring B Unit mmValve at gas side Evacuating How to open the valve Model RAV SM1400AT-E Useful Functions Final Installation Checks

RAV-SP1100UT-E, RAV-SP800AT-E, RAV-SP1100AT-E, RAV-SP1400UT-E, RAV-SP560AT-E specifications

Toshiba has consistently been at the forefront of advancing air conditioning technologies, and its line of products, including the RAV-SP1100AT-E, RAV-SP1100UT-E, RAV-SP1400UT-E, RAV-SP800AT-E, and RAV-SP560AT-E, exemplifies this commitment to quality and innovation. These models reflect Toshiba’s dedication to energy efficiency, user comfort, and technological sophistication.

The RAV-SP1100AT-E and RAV-SP1100UT-E are notable for their robust cooling capacities, making them ideal for medium to large spaces. With energy efficiency ratings that comply with global standards, these units help reduce electricity costs while maintaining optimal indoor temperatures. Both models feature advanced inverter technology, which allows for precise cooling and heating control. This technology not only ensures energy savings but also supports quieter operation, enhancing the overall comfort of the environment.

The RAV-SP1400UT-E stands out for its high-performance capabilities, designed to provide efficient climate control even under extreme conditions. This model integrates cutting-edge refrigerant technology, which minimizes environmental impact without compromising on performance. The RAV-SP1400UT-E offers advanced air purification systems that help eliminate dust and allergens, contributing to improved indoor air quality.

For those seeking compact yet powerful solutions, the RAV-SP800AT-E and RAV-SP560AT-E models are excellent choices. They are designed for smaller spaces without sacrificing efficiency. These units are equipped with compact designs that make installation straightforward, while still incorporating Toshiba’s inverter technology, allowing for both heating and cooling functions that adapt seamlessly to changing weather patterns.

All these models support advanced connectivity options, enabling users to monitor and control their units remotely through smart devices. This feature adds convenience and flexibility, allowing for greater energy management and comfort personalization.

In conclusion, Toshiba’s RAV-SP series embodies a blend of energy efficiency, advanced technology, and user-friendly features. These models not only cater to various cooling and heating needs but also prioritize environmental responsibility. With their ability to provide reliable performance across a range of conditions, Toshiba’s RAV-SP1100AT-E, RAV-SP1100UT-E, RAV-SP1400UT-E, RAV-SP800AT-E, and RAV-SP560AT-E stand out as exemplary choices for residential and commercial climate control solutions.