Useful Functions

7 FINAL INSTALLATION CHECKS

Check and Test Operation

For R410A, use the leak detector exclusively manufactured for HFC refrigerant (R410A, R134a, etc.).

*The conventional leak detector for HCFC refrigerant (R22, etc.) cannot be used because its sensitivity for HFC refrigerant lowers to approx. 1/40.

•Pressure of R410A is approx. 1.6 times higher than that of R22.

If installation work is incompletely finished, a gas leakage may occur when pressure rises during operation. Therefore, be sure to test the piping connections for leakage.

•Check gas leakage at the flare nut connections, valve stem cap connections and service port cap fittings with a leak detector or soap water.

CAUTION

When the remote controller is used for the first time, it accepts an operation approx. 5 minutes after the power supply has been turned on.

It is not a trouble, but is because the setup of the remote controller is being checked.

For the second power-ON time and after, approx. 1 munute is required to start the operation by the remote controller.

Self-Diagnosis by LED Indication

In addition to the code checking by remote controller of the indoor unit, troubles of the outdoor unit can be diag- nosed by LED indications on the cycle control P.C. board of the outdoor unit. Utilize them for various checks. For the check by remote controller of the indoor unit, refer to the Installation Manual of the indoor unit.

Before a check, confirm each bit of the DIP switch SW800 is set to OFF position.

LED indication and code checking

	Cycle control P.C. board

LED indication		LED indication				Cause

	D800		D801	D802	D803

	¡		l	l	l	Heat exchanger sensor (TE) error

	l		l	¡	l	Suction sensor (TS) error

	¡		¡	l	l	Discharge sensor (TD) error

D800 ¡ : Red	l		¡	l	¡	High-pressure protection error
D800 ¡ : Red
D801 ¡ : Yellow	l		¡	l	l	Outdoor temperature sensor (TO) error
D802 ¡ : Yellow
D802 ¡ : Yellow	¡		¡	¡	l	DC outside fan error
D803 ¡ : Yellow	¡		¡	¡	l	DC outside fan error

	¡		l	l	¡	Communication error between IPDU (Abnormal stop)
	¡		l	l	¡	Communication error between IPDU (Abnormal stop)

¥ : Rapid flash	l		¡	l	¡	High-pressure release operation
l : Go off
l : Go off	l		¡	¡	l	Discharge temp. error
¡ : Go on	l		¡	¡	l	Discharge temp. error

	¡		¡	l	¡	EEPROM error
	¡		¡	l	¡	EEPROM error

	l		l	¡	¡	Communication error between IPDU (No abnormal stop)

	¥		l	l	l	G-Tr short-circuit protection

	l		¥	l	l	Detect circuit error

	¥		¥	l	l	Current sensor error

	l		l	¥	l	Comp. lock error

	¥		l	¥	l	Comp. break down

RAV-SP1100UT-E, RAV-SP800AT-E, RAV-SP1100AT-E, RAV-SP1400UT-E, RAV-SP560AT-E specifications

Toshiba has consistently been at the forefront of advancing air conditioning technologies, and its line of products, including the RAV-SP1100AT-E, RAV-SP1100UT-E, RAV-SP1400UT-E, RAV-SP800AT-E, and RAV-SP560AT-E, exemplifies this commitment to quality and innovation. These models reflect Toshiba’s dedication to energy efficiency, user comfort, and technological sophistication.

The RAV-SP1100AT-E and RAV-SP1100UT-E are notable for their robust cooling capacities, making them ideal for medium to large spaces. With energy efficiency ratings that comply with global standards, these units help reduce electricity costs while maintaining optimal indoor temperatures. Both models feature advanced inverter technology, which allows for precise cooling and heating control. This technology not only ensures energy savings but also supports quieter operation, enhancing the overall comfort of the environment.

The RAV-SP1400UT-E stands out for its high-performance capabilities, designed to provide efficient climate control even under extreme conditions. This model integrates cutting-edge refrigerant technology, which minimizes environmental impact without compromising on performance. The RAV-SP1400UT-E offers advanced air purification systems that help eliminate dust and allergens, contributing to improved indoor air quality.

For those seeking compact yet powerful solutions, the RAV-SP800AT-E and RAV-SP560AT-E models are excellent choices. They are designed for smaller spaces without sacrificing efficiency. These units are equipped with compact designs that make installation straightforward, while still incorporating Toshiba’s inverter technology, allowing for both heating and cooling functions that adapt seamlessly to changing weather patterns.

All these models support advanced connectivity options, enabling users to monitor and control their units remotely through smart devices. This feature adds convenience and flexibility, allowing for greater energy management and comfort personalization.

In conclusion, Toshiba’s RAV-SP series embodies a blend of energy efficiency, advanced technology, and user-friendly features. These models not only cater to various cooling and heating needs but also prioritize environmental responsibility. With their ability to provide reliable performance across a range of conditions, Toshiba’s RAV-SP1100AT-E, RAV-SP1100UT-E, RAV-SP1400UT-E, RAV-SP800AT-E, and RAV-SP560AT-E stand out as exemplary choices for residential and commercial climate control solutions.