York ND360, ND480, ND600 manual Unit Connection Sizes, Minimum Clearances, Dimensions Hot Water Coil

628767-YTG-C-0910

Unit Connection Sizes

Model	ND360	ND480	ND600	M1CZ600A
Dimensions (inches)
Length	100.1	103.1	103.1	103.1
Width	38.1	45.4	45.5	53.7
Height	74.7	89.4	45.4	54.4
System Data
No. Refrigeration Circuits	2	2		2
Suction Line OD (in.)	1 1/8	1 3/8	-	2 1/8
Liquid Line OD (in.)	7/8	7/8	-	7/8
Power Wiring Knockout	7/8	7/8	1 3/8	-
Control Wiring Knockout	7/8	7/8	7/8	-
Drain Line	7/8	7/8	-	7/8
Blower Outlet
Number	2	2	2	-
Width	19.0	19.0	24.9	-
Length	22.0	22.0	23.0	-
Return Air Inlet
Width	33.2	40.5	-	49.5
Length	95.6	98.5	-	98.5

Minimum Clearances

Top with Supply Air Opening1	24”
Front with Return Air Opening	24”
Right Side with access for Piping, Power & Control	24”
Wiring Connections2
Left Side	24”
Rear3	N/A
Bottom4	N/A

1This dimension will vary if a supply air plenum or a base is used.

2This dimension is required for normal installation and service.

3Although no clearance is required for service and operation, some clearance may be required for routing the power and control wiring.

4Allow enough clearance to trap the condensate drain line.

Dimensions Hot Water Coil

Dimensions Hot Water Coil

COIL	UNIT			DIMENSIONS
MODEL	MODEL	A	B	C	D	E	F
1HW0406	ND360	100-1/8	37-7/8	6-3/4	3-7/8	1-3/8	1-3/8
1HW0407	ND480	103-1/8	45-1/4	6-1/2	4	1-5/8	1-5/8
	ND600

30 Johnson Controls Unitary Products