HP dc5850 manual NIC Connector, NIC Specifications, Parameter Compatibility standard orprotocol

Input/Output Interfaces

5.9.4 NIC Connector

Figure 5-11 shows the RJ-45 connector used for the NIC interface. This connector includes the two status LEDs as part of the connector assembly.

Speed LED								Activity LED
								Pin	Description
								1	Transmit+
								2	Transmit-
								3	Receive+
								6	Receive-
8	7	6	5	4	3	2	1	Pins 4, 5, 7, 8 not used

Figure 5-11. RJ-45 Ethernet TPE Connector (as viewed from rear of chassis)

5.9.5 NIC Specifications

	Table 5-11.
	NIC Specifications
Parameter	Compatibility standard orprotocol
Modes Supported	10BASE-T half duplex @ 10 Mb/s
	10Base-T full duplex @ 20 Mb/s
	100BASE-TX half duplex @ 100 Mb/s
	100Base-TX full duplex @ 200 Mb/s
	1000BASE-T half duplex @ 1 Gb/s
	1000BASE-TX full duplex @ 2 Gb/s
Standards Compliance	IEEE 802.1P, 802.1Q
	IEEE 802.2
	IEEE 802.3, 802.3ab, 802.3ad, 802.3u, 802.3x,
	802.3z
OS Driver Support	MS-DOS
	MS Windows 3.1
	MS Windows 95 (pre-OSR2), 98, and 2000
	Professional, XP Home, XP Pro, Vista Home, Vista Pro
	MS Windows NT 3.51 & 4.0
	Novell Netware 3.x, 4.x, 5x
	Novell Netware/IntraNetWare
	SCO UnixWare 7
	Linux 2.2, 2.4
	PXE 2.0
Boot ROM Support	Intel PRO/100 Boot Agent (PXE 3.0, RPL)
F12 BIOS Support	Yes
Bus Inteface	PCI Express x1
Power Management Support	ACPI, PCI Power Management Spec.

5-18 www.hp.com Technical Reference Guide