HP CW-450t manual Setting the Focus Mode, Setting the Drive Mode

Setting the Focus Mode

This function allows users to define the type focus when recording a still image or a video clip.

To set the Focus mode

•Tap the onscreen Macro button to display popup macro menu and tap the desired icon.

Icon.	Item	Description
	Normal	With normal focus, the focus range starts from 0.4m (about 16 inches) to near infinity.
		When the camera is set to Normal mode, there is no icon displayed on the screen.
		This mode is designed for close-up photography. This mode should be used for
	Macro	subjects closer that are 0.4 m (or 16 inches) from the lens. If Macro is enabled, the
		camera can capture the detail and sharpness of a very close subject by fixed focus.
		This mode is designed to accurately focus on a desired subject so that closer and
	Pan Focus	further objects are out of focus. For example, the camera might focus on a nearby
		tree, and the distant trees and mountains are blurry, as well as an even closer object
		such as a flower.
	Infinity	When Infinity is set, the camera focuses on distant objects. This may be good to use
		when taking landscape photos.

Setting the Drive Mode

Your camera features a Self-timer and Burst which can be set in the Drive mode function on the screen. The Self- timer allows you to take photos after a pre-defined delay. While burst lets you take consecutive shots. This function is only available in recording still images. The Drive mode setting is automatically set to off when you turn off the camera.

To activate Drive mode:

•Tap the onscreen Drive button to display the popup drive mode menu and tap the desired icon.

23