HP FX75 manual Tilting the Display, Using Screen Savers

Page 16

If your computer doesn’t use industry standard power-save signaling techniques, you can reduce power consumption by turning off the display when it won’t be used for an extended period. You can turn the display off even if you leave the computer running.

Warning: To completely disconnect power from the display, you must remove the power cord from the wall socket and then remove the power cable from the display.

Using Screen Savers

Because of the technology used in LCD panels, screen savers will not prolong the life of your FX75 display. If the display will not be used for an extended period, be sure to turn it off.

12HP Pavilion FX75 Flat Panel Display User’s Guide

Tilting the Display

The display has a tilt feature that allows you to tilt the display back and forth to find the most comfortable viewing position. To tilt the display, grasp the sides and push the display back or pull it toward you until it is in the desired position. The display can be tilted 35 degrees backward and 5 degrees forward.

Note: Do not tilt the display by grasping the top edge.

Grasp here

to tilt

Filename: fx75UGrw.doc	Title: Book Title
Template: HP-Print.dot	Author: WASSER, Inc. Last Saved By: WASSER, Inc.

Revision #: 30 Page: 12 of 43 Printed: 10/16/00 03:31 PM

Image 16

Contents HP Pavilion FX75 Flat Panel Display User’s Guide Revision # 30 Page 2 of 43 Printed 10/16/00 0331 PM Contents Iv HP Pavilion FX75 Flat Panel Display User’s Guide Introduction IntroductionDo not cover the air vents For Your SafetyHP Pavilion FX75 Flat Panel Display User’s Guide Display has been dropped or the cabinet has been damaged Installation Unpacking the Display InstallationPositioning the Display Connecting the Power and Video Cables Plug the two-prong power cord into a power Connecting Stereo Speaker System On the audio cable. This connector is labeled subwoofer Display. The jack is colored blue to matchCable plug Is locatedUsing the Display Power button Turning the Display On and OffUsing Screen Savers Tilting the DisplaySetting the Video Mode Since the inherent format of the FX75 display isSetting the Refresh Rate Caring For Cleaning the Display Minimizing Energy UseCleaning the Screen Changing Display Settings Changing Display SettingsUsing the Control Buttons Displaying the OSD WindowNew mode Option DescriptionSelecting Options OSD Window Using Auto Setup Press the Select button to execute your selectionAdjusting the Image Press the Select button again to choose Auto SetupPositioning the Image Table below briefly describes each of these functionsSelecting a Scaling Mode Scaling options areAdjusting the Sharpness Level Adjusting Color Settings Adjusting Gamma CorrectionAdjusting Color Temperature See Saving and Restoring Color Settings onTo adjust color temperature Adjusting RGB or Black Level Saving and Restoring Color Settings Adjusting Advanced Settings Adjusting the Phase and ClockSelecting the Video Interface To select the video interfaceTroubleshooting Message Check Cable appears on my displayMessage Unknown Mode Detected appears on my display TroubleshootingTechnical Information FX75 Display InformationFX75 Video Modes Unknown Video ModesRegulatory Information Declaration of ConformityFCC Statement Regulatory InformationGeneral Notice Revision # 30 Page 39 of 43 Printed 10/16/00 0331 PM