6Press the + or — buttons to highlight Phase Adjust or Clock Adjust.
7Press Select.
8Press the + or — buttons to adjust the image quality.
9Press Select.
10To exit the OSD, select Exit on each OSD window or wait for the OSD to close automatically.
Selecting the Video Interface
When a single cable is plugged into one of the video input ports, your display automatically detects which port to use. If you have cables plugged into the analog and digital ports, the analog port is used by default. Use the Video Interface option to specify which port you want the display to use.
To select the video interface:
1Press the Select button under the display to open the OSD main window.
2Press the + or — buttons under the display until the Image Adjust function is highlighted.
3Press the Select button.
4Press the + or — buttons until the Advanced function is highlighted.
5Press the Select button.
6Press the + or — buttons to highlight Video Interface.
7Press Select.
8Press the + or — buttons to highlight Analog or Digital.
9Press Select.
10To exit the OSD, select Exit on each OSD window or wait for the OSD to close automatically.
Changing Display Settings | 31 |
Filename: fx75UGrw.doc | Title: Book Title |
Template: | Author: WASSER, Inc. Last Saved By: WASSER, Inc. |
Revision #: 30 Page: 31 of 43 Printed: 10/16/00 03:31 PM