HP FX75 manual Adjusting Color Settings, Adjusting Gamma Correction

Page 30

6Press the + or — buttons to highlight Smart sharpening, High, Medium, or Low.

Note: As you highlight an option, your screen immediately updates to reflect this setting.

7When the desired option is highlighted, press the Select button.

8To exit the OSD, select Exit on each OSD window or wait for the OSD to close automatically.

Adjusting Color Settings

The OSD offers four different controls for fine-tuning colors on your display: Gamma Correct, Color Temp, RGB Adjust, and Black Level Adjust.

Adjusting Gamma Correction

The Gamma Correct option changes the luminance relationship between levels of gray (or colors). With the LCD Corrected option, there is no gamma correction. With the CRT Corrected option, the color performance will be similar to that of a CRT display. For optimum viewing, use the LCD Corrected option.

To adjust gamma correction:

1Press the Select button under the display to open the OSD main window.

2Press the + or — buttons under the display until the Image Adjust function is highlighted.

3Press the Select button.

4Press the + or — buttons until the Color function is highlighted.

26HP Pavilion FX75 Flat Panel Display User’s Guide

Filename: fx75UGrw.doc	Title: Book Title
Template: HP-Print.dot	Author: WASSER, Inc. Last Saved By: WASSER, Inc.

Revision #: 30 Page: 26 of 43 Printed: 10/16/00 03:31 PM

Image 30

Contents HP Pavilion FX75 Flat Panel Display User’s Guide Revision # 30 Page 2 of 43 Printed 10/16/00 0331 PM Contents Iv HP Pavilion FX75 Flat Panel Display User’s Guide Introduction IntroductionFor Your Safety Do not cover the air ventsHP Pavilion FX75 Flat Panel Display User’s Guide Display has been dropped or the cabinet has been damaged Installation Installation Unpacking the DisplayPositioning the Display Connecting the Power and Video Cables Plug the two-prong power cord into a power Connecting Stereo Speaker System Cable plug On the audio cable. This connector is labeled subwooferDisplay. The jack is colored blue to match Is locatedUsing the Display Power button Turning the Display On and OffUsing Screen Savers Tilting the DisplaySetting the Video Mode Since the inherent format of the FX75 display isSetting the Refresh Rate Caring For Cleaning the Display Minimizing Energy UseCleaning the Screen Changing Display Settings Changing Display SettingsUsing the Control Buttons Displaying the OSD WindowNew mode Option DescriptionSelecting Options OSD Window Using Auto Setup Press the Select button to execute your selectionAdjusting the Image Press the Select button again to choose Auto SetupPositioning the Image Table below briefly describes each of these functionsSelecting a Scaling Mode Scaling options areAdjusting the Sharpness Level Adjusting Color Settings Adjusting Gamma CorrectionSee Saving and Restoring Color Settings on Adjusting Color TemperatureTo adjust color temperature Adjusting RGB or Black Level Saving and Restoring Color Settings Adjusting Advanced Settings Adjusting the Phase and ClockSelecting the Video Interface To select the video interfaceTroubleshooting Message Check Cable appears on my displayMessage Unknown Mode Detected appears on my display TroubleshootingTechnical Information FX75 Display InformationFX75 Video Modes Unknown Video ModesRegulatory Information Declaration of ConformityFCC Statement Regulatory InformationGeneral Notice Revision # 30 Page 39 of 43 Printed 10/16/00 0331 PM