HP L1510 15” LCD Monitor
Setting Up Your Monitor
Connecting the Cables
This monitor is equipped with an
audio connectors
video connector
adapter output
video cable
power source |
| power cord |
|
1Make sure the system power is turned off.
2Plug the signal cable into the signal connector at the rear of the PC.
3Plug the adapter output cable into the jack at the rear of the monitor and the power cord to the adapter.
4Plug the video cable into the video connector at the rear of the monitor.
Secure the cable by tightening the thumb screws on the video connector.
5Connect the audio cables to the connectors according to the following color definitions:
Red + Green end ➔ PC
Red + Blue end ➔ rear of LCD monitor
6Connect the power cord to the power source.
7Turn on the computer and the monitor.
6English