HP XU manual Connecting an External Scsi Accessory

Page 22

crystal.bk : cryst-1.fb4 Page 6 Monday, March 23, 1998 4:09 AM

NOTE

1 Setting Up and Using Your PC Workstation

Connecting an External SCSI Accessory

Connecting an External SCSI Accessory

Your PC Workstation is equipped with an UltraWide 16-bit SCSI connector for external SCSI devices.

When an external SCSI device is connected, the UltraWide 16-bit SCSI controller automatically switches to non-Ultra mode (maximum capacity of 20 MBs per second).

An external SCSI device is connected as follows:

1You should assign an unused SCSI address to the accessory. SCSI addresses range from 0 to 15 for wide 16-bit SCSI. The SCSI address 0 is reserved for the first SCSI hard disk drive and SCSI address 7 is reserved for SCSI controller (the default for narrow and wide SCSI devices).

Refer to the manual provided with the SCSI accessory for instructions on selecting a SCSI address.

You don’t need to set a SCSI address for Plug and Play SCSI devices (SCSI devices which support the SCAM protocol).

2Make sure the SCSI accessory is terminated correctly—either internally or by a terminating resistor (refer to the manual provided with the SCSI accessory).

Make sure the SCSI accessory is terminated

6

Image 22
Contents User’s Guide Crystal.bk notice.fb4 Page ii Monday, March 23, 1998 605 AM User’s Guide Welcome to Your HP Kayak XU & XW PC Workstations Enables you to scroll without using the scroll bars Five front-access shelvesSix slots for accessory boards An HP UltraFlow cooling system with multiple temperatureImportant Safety Information Who This Manual Is ForImportant Ergonomic Information Crystal.bk title.fb4 Page vii Monday, March 23, 1998 409 AMCrystal.bk title.fb4 Page viii Monday, March 23, 1998 409 AM Contents Installing a Processor Installing Mass Storage DevicesInstalling Accessory Boards Recycling an Old HP PC WorkstationIf Your PC Workstation Has a Software Problem Solving ProblemsIf Your PC Workstation Does Not Start Properly Using HP MaxiLife to Diagnose Problems HP Hardware Diagnostics UtilityConfiguring a Scsi Accessory HP Summary Screen and Setup ProgramConfiguring Your Network Connection Using the ArrayConfig ProgramHewlett Packard Support and Information Services Crystal.bk crystal.toc Page xv Monday, March 23, 1998 409 AM Xvi Setting Up and Using Your PC Workstation Installation Tools Unpacking Your PC WorkstationConnecting the Mouse, Keyboard, Display and Printer Connecting to a Network Your PC Workstation has a 10BT/100TX LAN interface adapterVolume control in that position Connecting Audio AccessoriesVolume before connecting headphones or speakers Damage your hearingConnecting an External Scsi Accessory External Scsi accessories To install any software that may be necessary to use itApproximately 10 feet Connecting the Power Cords Your PC Workstation’s Hardware Control Panel With HP Lock installed, you can use this button to preventEntering a password refer to Setting Passwords on PC Lock ButtonStarting Your PC Workstation for the First Time Starting and Stopping Your PC WorkstationInitializing Your Software Creating Back-up Diskettes Starting Your PC WorkstationStopping Your PC Workstation Using Your HP Enhanced Keyboard Internet Key Menu KeyShortcut Keys HP TopToolsHP Customer InformationUsing Your HP Enhanced Mouse Function to work in a different wayApplications that support a third control button Setting Passwords Setting an Administrator PasswordSetting a User Password Using Power Management Additional Information and HelpRecycling an Old HP PC Workstation Crystal.bk cryst-1.fb4 Page 22 Monday, March 23, 1998 409 AM How to Install Accessories Inside Your PC Workstation Supported HP Accessories Buffered 32 MB, 64 MB or 128 MB DIMMsRemoving and Replacing the Cover PC Workstation before switching it on againRemoving the Cover Crystal.bk cryst-2.fb4 Page 26 Monday, March 23, 1998 409 AM Replacing the Cover Crystal.bk cryst-2.fb4 Page 28 Monday, March 23, 1998 409 AM Moving the Power Supply To avoid electrical shock, do not open the power supply Supply unit remains connected to the computerInstalling Memory Main Memory ModulesCrystal.bk cryst-2.fb4 Page 32 Monday, March 23, 1998 409 AM Crystal.bk cryst-2.fb4 Page 33 Monday, March 23, 1998 409 AM Installing More Memory on the Video Adapter Procedure HP Visualize FX4Installing Mass Storage Devices Connecting Devices Bit Scsi with five 68-pin Scsi connectorsCrystal.bk cryst-2.fb4 Page 38 Monday, March 23, 1998 409 AM Disk Striping Installing a HardDisk Drive IDE Hard DiskInstalling a Hard Disk Drive in an Internal Shelf Secure the drive with the four self-retaining screws Locate the appropriate data cable for the hard disk drive Installing a Hard Disk Drive in a Front-Access Shelf Mount the drive on the tray as shown below Slide the drive tray into the drive shelf and secure itLocate the appropriate data cable for the disk drive Completing the Installation of a Hard Disk Drive Installing a Drive in a Front-Access Shelf Locate the appropriate data cable for the device Completing the Installation of a Drive Installing Accessory Boards Installing the BoardCrystal.bk cryst-2.fb4 Page 51 Monday, March 23, 1998 409 AM Accessory Board CompletingInstalling a Processor Board. Then remove the VRM for the processor PC Workstation will void the warrantySocket by squeezing the tabs at the top and bottom TerminatorCompleting Installation of a Processor Bus SpeedCrystal.bk cryst-2.fb4 Page 56 Monday, March 23, 1998 409 AM Troubleshooting Your PC Workstation HP Diagnostics Solving ProblemsHP Summary Screen Display is Blank and There Are No Error Messages If Your PC Workstation Does Not Start ProperlyCorrectly installed CPU Freq Remove the cover Check the following itemsEnsure that you are using the correct password If you are Unable to Change any Values in SetupIf a Post Error Message is Displayed Rebuild Your PC Workstation’s ComponentsClearing PC Workstation’s Displayed similar to thisIf You Cannot Turn Off Your PC Workstation Display Does Not Work Properly If Your PC Workstation Has a Hardware ProblemPC Workstation’s operating system documentation for details If Your Keyboard Does Not Work If Your Mouse Does Not WorkIf Your Printer Does Not Work If the Flexible Disk Drive Does Not WorkIf the Hard Disk Drive Does not Work Cable connections or jumper settings If the CD-ROM Drive Has a ProblemCD-ROM Drive Does not Work No Sound from the CD-ROM Drive If you are having problems with sound when playing a CDCD-ROM Drive is Idle CD-ROM Drive Does not Open If an Accessory Board Does not Work If Your PC Workstation Has a Software Problem If You Have Forgotten Your PasswordIf the Date and Time Are Incorrect If You Can’t Start the Setup ProgramIf You Have a Network Problem If Your Application Software Does Not WorkIf Your PC Workstation Has an Audio Problem Using HP MaxiLife to Diagnose Problems May not be availablePost Phase Other FeaturesDiags Boot StepsAs follows Press the control button You can exit the test session by pressing the buttonHP Hardware Diagnostics Utility Starting This Support TicketTechnical Information Features Feature DescriptionCrystal.bk cryst-4.fb4 Page 83 Monday, March 23, 1998 409 AM Crystal.bk cryst-4.fb4 Page 84 Monday, March 23, 1998 409 AM Power Consumption Information System SpecificationsMaximum Loads Available for Accessory Slots IRQs, DMAs, and I/O Addresses Used by Your PC Workstation Crystal.bk cryst-4.fb4 Page 87 Monday, March 23, 1998 409 AM Audio Features Digitized SoundsCrystal.bk cryst-4.fb4 Page 89 Monday, March 23, 1998 409 AM Video Features Scsi Features MB per second Scam support HP FastRAIDDisk Striping Features FastRAID RAID 1 with 2 disk drivesNetwork Features HP FastRAID Option PC Workstation’s Rear Connectors System Connectors and Switches System Board ConnectorsInternal Audio Connectors When the headphone jack on the Audio Front Panel System Board Switches Switch1 Use Switch to Setup program, and bypass the Summary Screen, press instead HP Summary Screen and Setup ProgramStarting the HP Setup Program Viewing the HP Summary ScreenSaving Your Changes and Leaving Setup Plug & Play O/SConfiguring Your Network Connection Controlling the Network Security FeaturesSelecting the Boot Device Priority Using Scsi Select Configuring a Scsi AccessorySCSISelect utility is accessed by pressing during Configure/View Press to view the Advanced Configuration Options menu Changes the adapter Scsi ID from its default valueScsi Channel Interface Definitions Boot Scsi ID Initiate Sync Negotiation Options Menu This option is no longer used and must always be Enabled Plug and Play Scam SupportVerify Disk Media Using the Scsi Configuration Utility Default Settings You Can ChangeMain Menu Starting the Scsi Configuration UtilityBelow Help Display ModeMono/Color QuitAdapter Setup Adapter Utilities MenuScam Support Adapter Setup MenuParity Removable Media Host Scsi IDScan Order SupportDevice Selections Menu LunsBytes/sec Device Setup MenuSync Rate Mega Width bitsDisconnect Read Write I/O Timeout sec Scan for Device at Boot TimeExiting from the Configuration Utility Queue TagsUsing the ArrayConfig Program Creating a New Array↓ keys until the option is highlighted and then press Two-drive RAID 0 arrayDiskettes you made before creating your array DetectedWhen the Main Menu appears, select Disk Array Operations Insert the ArrayConfig diskette in drive a and reboot yourComputer. Wait until ArrayConfig starts automatically Following126 127 Managing an Existing Array Making the Array BootableDisplaying Array Information Deleting an Array Initializing an Array Adding and Deleting Spares Adding a Dedicated SpareDelete and press Disk as a spareFollow these steps to delete a dedicated spare Dedicated spare is deleted immediatelyOptimizing Performance Or the HP websiteResolving Problems Otherwise, select the Array1000 Family Raid Adapter by usingKayaksupport/ to see if this has been corrected Yes, you can boot without any problem from an array Frequently Asked QuestionsNon-RAID device is set to Key Technical Information Using the ArrayConfig Program 138 Hewlett Packard Support and Information Services Service Means of Access IntroductionYour HP-Authorized Reseller HP SupportPackHP Support Assistant CD-ROM Region Phone Number Fax NumberHP Forum on CompuServe Hewlett-Packard Information ServicesAt the CompuServe ! prompt, type GO HP HP Forum on America Online HP World Wide Web SiteOrdering Drivers and Bios on Diskette EuropeHP Support Services Customer Support Center Hewlett-Packard Telephone SupportNumber is +1 970 Lifeline Telephone Support Europe, please call the telephone support center +44 171 512HP Network Phone-in Support Service NPS Summary Covered Time Available FromHewlett-Packard Marketing Headquarters Asia Latin AmericaPage Glossary Glossary Commonly used to select configuration options Polyphonic More than one voice played simultaneously Synthesizer Hardware for 158 Index Index Crystal.bk crystal.ix Page 161 Monday, March 23, 1998 409 AM Crystal.bk crystal.ix Page 162 Monday, March 23, 1998 409 AM Crystal.bk crystal.ix Page 163 Monday, March 23, 1998 409 AM Crystal.bk crystal.ix Page 164 Monday, March 23, 1998 409 AM Regulatory Information and Warranty Regulatory Information 167 168 169 170 171 HP Software Product Limited Warranty Your HP PC Workstation’s Physical Characteristics PC Workstation Documentation Roadmap
Related manuals
Manual 8 pages 26.72 Kb Manual 89 pages 52.44 Kb

XU specifications

The HP XU series is a notable lineup in the realm of computing, specifically designed to cater to business professionals and everyday users who require reliability, performance, and modern features. The XU brand, recognized for its dedication to high-quality engineering and innovative technology, encapsulates the spirit of HP's commitment to excellence in device performance and user experience.

One of the main features of the HP XU series is its powerful processing capabilities. Equipped with the latest generation of Intel or AMD processors, the XU series ensures swift and efficient multitasking, allowing users to run demanding applications with ease. This robust hardware foundation is complemented by ample RAM options, which facilitate seamless performance even when handling larger files or running multiple applications simultaneously.

Moreover, the HP XU series emphasizes security, a critical aspect for businesses today. Many models are infused with advanced security features such as fingerprint readers, TPM (Trusted Platform Module) chips, and HP's proprietary security software. These technologies work together to protect sensitive data and provide peace of mind to users concerned about cyber threats.

Display quality is another hallmark of the HP XU series. The devices often feature high-resolution displays, available in various sizes, which provide vibrant colors and sharp visuals. Whether for presentations, graphic design, or media consumption, the clarity and detail of the screen enhance the overall user experience. Additionally, many models offer touch screen capabilities, adding an extra layer of interactivity and ease of use.

In terms of connectivity, the HP XU series is equipped with a comprehensive range of ports, including USB-C, HDMI, and Ethernet, as well as built-in Wi-Fi and Bluetooth technologies. This ensures that users can easily connect to other devices and networks, facilitating collaboration and productivity on the go.

Battery life is also a significant consideration. The HP XU series is designed for endurance, with many models offering long-lasting battery performance that supports a full day of work without the need for frequent charging. This is particularly beneficial for professionals who are often on the move.

In conclusion, the HP XU series exemplifies the convergence of performance, security, and user-friendly design, making it an excellent choice for both business environments and personal use. With a blend of cutting-edge technology, durable build quality, and thoughtful features, the XU series stands as a testament to HP's evolution in providing innovative computing solutions tailored to meet diverse user needs.