HP DL370 Rack Airflow Rack 10000 series Cabinets Requirements, Telco Rack Support, HP Enterprise

QuickSpecs

HP ProLiant DL370 Generation 6 (G6) HP ProLiant ML370 Generation 6 (G6)

Standard Features

Rack Airflow	Rack 10000 series Cabinets
Requirements	The increasing power of new high-performance processor technology requires increased cooling
	efficiency for rack-mounted servers. The 10000 Series Racks provide enhanced airflow for maximum
	cooling, allowing these racks to be fully loaded with servers using the latest processors.
	CAUTION: If a third-party rack is used, observe the following additional requirements to ensure
	adequate airflow and to prevent damage to the equipment:
	Front and rear doors: If your 42U server rack includes closing front and rear doors, you must
	allow 830 square inches (5,350 sq cm) of hole evenly distributed from top to bottom to permit
	adequate airflow (equivalent to the required 64 percent open area for ventilation).
	Side: The clearance between the installed rack component and the side panels of the rack must be
	a minimum of 2.75 inches (7 cm).
	CAUTION: Always use blanking panels to fill all remaining empty front panel U-spaces in the rack. This
	arrangement ensures proper airflow. Using a rack without blanking panels results in improper cooling
	that can lead to thermal damage.
	NOTE: For additional information, refer to the Setup and Installation Guide or the Documentation CD
	provided with the server, or to the server documentation located in the Support section at the following
	URL: www.hp.com/servers/dl370 or www.hp.com/servers/ml370.
Telco Rack Support	ProLiant rack mount servers and tower-to-rack kits include snap-on quick deploy side rails designed to
	accommodate both round and square hole rack rails. Telco rack solutions for ProLiant servers are
	available through the following URL: http://www.racksolutions.com/hp.
Factory Express Portfolio	HP Factory Express offers configuration, customization, integration and deployment services for HP
for Servers and Storage	servers and storage products. Customers can choose how their factory solutions are built, tested,
	integrated, shipped and deployed.
	Factory Express offers service packages for simple configuration, racking, installation, complex
	configuration and design services as well as individual factory services, such as image loading, asset
	tagging, and custom packaging. HP products supported through Factory Express include a wide array of
	servers and storage: HP Integrity, HP ProLiant, HP ProLiant Server Blades, HP BladeSystem, HP 9000
	servers as well as the MSAxxxx, VA7xxx, EVA, XP, rackable tape libraries and configurable network
	switches.
	For more information on Factory Express services for your specific server model please contact your sales
	representative or go to: http://www.hp.com/go/factory-express.
HP Enterprise	The HP eConfigure-Enterprise Configurator now provides factory default racking for our HP hardware
Configurator	portfolio. This approach is aligned with our strategic direction to meet the needs and expectations of our
	valued customers. If you require "custom" rack configuration, please contact HP's Customer Business
	Center or an Authorized Partner for assistance. http://www.hp.com/products/configurator

DA - 13242 Worldwide — Version 3 — April 2, 2009 Page 16