HP DL370 Smart Array P410i Dimensions, Interface Transfer rate, SAS Connectors, Server Interface

QuickSpecs

HP ProLiant DL370 Generation 6 (G6) HP ProLiant ML370 Generation 6 (G6)

Technical Specifications

		NOTE: Product conformance to cited product specifications is based on
		sample (type) testing, evaluation, or assessment. This product or family of
		products is eligible to bear the appropriate compliance logos and
		statements.
Smart Array P410i	Dimensions	Low Profile PCIe Form Factor
Controller	(not including bracket)	7.5 in x 9.5 in x 2.25 in (19.05 cm x 24.13 cm x 5.72 cm)
	Disk Drive and Enclosure	3G SAS (Serial Attached SCSI)/6G SAS Capable
	Interface - Transfer rate	1.5G SATA (Serial ATA)/3G SATA Capable
	SAS Connectors	2 internal (Mini-SAS) x8 wide port connectors
	Cache Memory Speed	DDR2-800MHz with 40 or 72-bit wide bus provides up to 4.2 GB/s
		maximum bandwidth.
	Server Interface	x8 5G PCIe 2.0 provides 4GB/s maximum bandwidth
	SAS Speed	x8 3G SAS provides 2.4GB/s maximum bandwidth
	Cache Memory	40-bit 256MB ECC protected cache (72-bit 512MB BBWC module
		upgrades available); transportable with battery-backed upgrade
	Logical Drives Supported	Up to 12 logical drives
	Maximum Logical Drive	Greater than 2TB
	Capacity
	Host Memory Addressing	64-bit, supporting greater than 4GB server memory space
	RAID Support	RAID 6, 6+0 (Advanced Data Guarding)
		NOTE: The minimum of 256 MB cache, battery kit, and Smart Array
		Advanced Pack License Key upgrade is required to enable RAID 6, 6+0
		RAID 5, 5+0 (Distributed Data Guarding)
		NOTE: The 256 MB & Battery Kit upgrade is required to enable RAID 5,
		5+0 support of the Smart Array P410i
		RAID 1+0 (Striping & Mirroring)
		RAID 0 (Striping)
	Upgradeable Firmware	Upgradeable Firmware with recovery ROM feature

DA - 13242 Worldwide — Version 3 — April 2, 2009 Page 55