QuickSpecs
HP Z600 Workstation
Overview
Color | Black/Silver |
|
I/O Slots (see system | 2 PCI Express Gen2 x16 slots | |
board section for more | 1 PCI Express Gen2 x4/x8* slot – with x8 | |
details) | 1 PCI Express Gen1 x4/x8* slot – with x8 | |
| 2 PCI 32bit/33MHz slot, | |
| *These slots have 4 PCI Express lanes routed to them. They are sometimes called "x4 electrial, x8 | |
| mechanical" slots. |
|
| The PCIe x8 connectors are open ended, allowing a PCIe x16 card to be seated in the slot. | |
Bays (see storage | Total Bays = 4 |
|
section for more details) |
|
|
Internal Bays | 2 internal 3.5" bays (with acoustic dampening rail assemblies) | |
External Bays | 2 external 5.25" bays |
|
| (3rd & 4th HDDs occupy one external bay) | |
Front I/O | 3 USB 2.0, 1 Headphone Out, 1 Microphone In. 1 IEEE 1394a integrated with systems | |
| manufactured beginning 3/22/10. | |
Rear I/O | 6 USB 2.0 |
|
| 1 | |
| 2 legacy PS/2 |
|
| 1 Audio Line In, 1 Audio Line Out, 1 Microphone In; audio ports can be retasked to function as line | |
| in, line out, microphone, or headphone. | |
| Serial supported with optional rear bulkhead adapter. | |
Internal USB | 3 USB 2.0 headers |
|
| [3 USB 2.0 ports available by one 2x5 header and one 1x5 header: supports either up to two HP | |
| Internal USB Port Kits, AMO- EM165AA (one port on each Kit), or one Internal Port kit and one | |
| USB Media Card Reader.] |
|
Chassis Dimensions | 44.51 x 16.53 x 44 cm (17.5 x 6.5 x 17.3 in) | |
(H x W x D) |
|
|
System Weight | Exact weights depend upon configuration | |
| Minimum config - 15.0 kg (33.0 lb) | |
| Typical config - 16.9 kg (37.4 lb) | |
| Maximum config - 19.6 kg (43.3 lb) | |
| (Maximum shipping weight - 23.6 kg/52.0 lb) | |
Temperature | Operating: | 5° to 35° C (40° to 95° F) |
| ||
Humidity | Operating: | 8% to 85% |
| 8% to 90% | |
Maximum Altitude | Operating: | 3,000 m; 10,000 feet |
9,100 m; 30,000 feet | ||
Power Supply | 650W 85% Efficient | |
| connection |
|
| The Power Supply Efficiency Report for this product may be found at this link: | |
| ||
| Report_mod.pdf |
|
Interfaces Supported | ||
| eSATA configurable for use with eSATA CTO/AMO Kit) | |
| SAS interface supported with optional LSI 3041E | |
| 1 Floppy interface (1 Floppy connector), USB 2.0. 1 IEEE 1394a interface with systems | |
| manufactured beginning 3/22/10. |
DA - 13277 Worldwide QuickSpecs — Version 23 — 12/1/2010 | Page 4 |