QuickSpecs
HP Z600 Workstation
Technical Specifications - Hard Drive Controllers
LSI 3041E | PCI Bus |
| |
3.0 Gb/s RAID Card | PCI Modes | Bus Master DMA |
|
| RAID Levels | RAID 0, 1, 1E and 10E |
|
| PCI Data Burst | 250 MB/s per lane half duplex | |
| Transfer Rate | 500 MB/s per lane full duplex | |
|
| 1,000 MB/s | |
| SAS Bandwidth | Half Duplex | Single lane – 300 MB/s |
|
|
| Wide Port (2 lanes) – 600 MB/s |
|
|
| Wide Port (4 lanes) – 1200 MB/s |
|
| Full Duplex | Single SAS Lane – 600 MB/s |
|
|
| Wide Port (2 lanes) |
|
|
| Wide Port (4 lanes) – 2400 MB/s |
| PCI Card Type | 3.3 volt |
|
| PCI Voltage | 12 V ± 10% |
|
| PCI Power | 7.5 Watts |
|
| Bracket | Full height and | |
| Certification Level |
| |
| IO Bus | Four 3 Gb/s SAS/SATA ports | |
| SAS Processor | LSISAS1064E |
|
| Internal Connectors | Four- SATA x1 connectors | |
| External Connectors | None |
|
| Maximum Number of | 122 |
|
| SCSI Devices |
|
|
| LED Indicators | ||
| Integrated Mirroring | Integrated Mirroring option available | |
|
|
|
|
LSI MegaRAID® SAS | PCI Bus |
| |
8888ELP Host Bus | PCI Modes | Bus Master DMA |
|
Adapter (HBA) | RAID Levels | RAID 0, 1, and 5 |
|
|
| ||
|
| RAID spans 10 and 50 |
|
| PCI Data Burst | Up to 3Gb/s per port |
|
| Transfer Rate |
|
|
| Full Duplex | Up to 1.5 GB/s |
|
| PCI Voltage | +3.3V |
|
| PCI Power | 19.2 Watts Maximum |
|
| Certification Level |
| |
| IO Bus | Eight 3Gb/s SAS/SATA ports | |
| Internal Connectors | Two SAS SFF8087 x4 |
|
| External Connectors | Two SAS SFF8088 x4 |
|
| Maximum Number of | 32 |
|
| SCSI Devices |
|
|
| LED Indicators | Connector LEDs indicate whether the internal or external connector is | |
|
| active for ports | |
DA - 13277 Worldwide QuickSpecs — Version 23 — 12/1/2010 | Page 44 |