
QuickSpecs
HP Z600 Workstation
Supported Components
16GB (4x4GB)   | Both processor  | 
CPU | sockets must be  | 
  | populated.  | 
24GB (6x4GB)   | Both processor  | 
CPU | sockets must be  | 
  | populated.  | 
32GB (4x8GB)   | Both processor  | 
CPU | sockets must be  | 
  | populated.  | 
48GB (6x8GB)   | Both processor  | 
CPU | sockets must be  | 
  | populated.  | 
 | Both processor  | 
  | sockets must be  | 
  | populated.  | 
The Z600 has a 
AMO | 
  | 
 | 
  | 
1GB (1x1GB)   | FX698AA  | 
2GB (1x2GB)   | FX699AA  | 
4GB (1x4GB)   | NL797AA  | 
 | 
  | 
8GB (1x8GB)   | FX622AA  | 
4GB (1x4GB)   | FX621AA | 
NOTE: Although all of these memory configurations incorporate 1333MHz memory modules, the speed at which they operate is dependent upon the processor.
Support for Registered DIMMs on the Z600 requires a systemboard with the C2 revision of the Intel 5520 chipset. Two methods are available to determine if a specific Z600 system has the C2 revision of the chipset. 1. Use the BIOS setup menu to access the “Boot Block Date” from the “System Information Menu”. All 
DA - 13277 Worldwide QuickSpecs — Version 23 — 12/1/2010  | Page 11  |