HP 600 manual Setup, Space and airflow requirements, Temperature requirements

Page 14

Setup

Space and airflow requirements

To allow for servicing and adequate airflow, observe the following space and airflow requirements when deciding where to install a rack:

•Leave a minimum clearance of 63.5 cm (25.0 in) in front of the rack.

•Leave a minimum clearance of 76.2 cm (30.0 in) behind the rack.

•Leave a minimum clearance of 121.9 cm (48.0 in) from the back of the rack to the back of another rack or row of racks.

The HP MDS600 draws in cool air through the front door, and then expels warm air through the rear door. Therefore, the front and rear rack doors must be ventilated adequately to enable ambient room air to enter the cabinet, and the rear door must be ventilated adequately to enable the warm air to escape from the cabinet.

CAUTION: To prevent improper cooling and damage to the equipment, do not block the ventilation openings.

When a vertical space in the rack is not populated by a server or rack component, the gaps between the components cause changes in airflow through the rack and across the servers. Cover all gaps with blanking panels to maintain proper airflow.

CAUTION: Always use blanking panels to fill empty vertical spaces in the rack. This arrangement ensures proper airflow. Using a rack without blanking panels results in improper cooling that can lead to thermal damage.

The HP Rack 10000 series rack provides proper server cooling from flow-through perforations in the front and rear doors that provide a 64-percent open area for ventilation.

CAUTION: HP has not tested or validated the MDS600 with any third-party rack. If a third-party rack is used, observe the following additional requirements to ensure adequate airflow and to prevent damage to the equipment:

•Front and rear doors—If the 42U rack includes closing front and rear doors, you must allow at least 5,350 sq cm (830 sq in) of holes evenly distributed from top to bottom to permit adequate airflow (equivalent to the required 64-percent open area for ventilation).

•Side—The clearance between the installed rack component and the side panels of the rack must be a minimum of 7 cm (2.75 in).

Temperature requirements

To ensure continued safe and reliable equipment operation, install or position the MDS600 in a well-ventilated, climate-controlled environment.

The maximum TMRA for most MDS600 products is 35°C (95°F). The temperature in the cold isle where the rack is located must not exceed 35°C (95°F). The MDS600 reports an over temperature condition and

Setup 14

Page 13 Page 15
Image 14
Page 13 Page 15
Contents HP StorageWorks 600 Modular Disk System User Guide Page Contents Electrostatic discharge Component identification Front panel componentsFront panel LEDs and button Description StatusRear panel components GSI LEDRear panel LEDs and buttons Blue flashing = System is in hard drive Device bay ID numbers SAS and Sata hard drive LEDs SAS and Sata hard drive LED combinations Operations Firmware updatePower up Power down Space and airflow requirements SetupTemperature requirements Power requirements Electrical grounding requirementsThird-party racks Installing the enclosureRack warnings Site planning considerationsSetup Hard drive overview SAS and Sata hard drive guidelinesInstalling the hard drives Remove the hard drive blank Prepare the hard drive Installing the I/O module Cabling the MDS600 SAS cabling guidelinesPower cords Array Configuration Utility Configuration and utilitiesConfiguration tools Option ROM Configuration for ArraysDiagnostic tools Management toolsHP Insight Remote Support software Array Diagnostic UtilityRemote support and analysis tools Care Pack Keeping the system currentChange control and proactive notification LED behavior TroubleshootingWhen the MDS600 does not power up Segment display status codes and actions = System FanEffects of a hard drive failure Compromised fault toleranceRecognizing hard drive failure Recovering from compromised fault tolerance Factors to consider before replacing hard drivesAutomatic data recovery rebuild Time required for a rebuildFailure of another drive during rebuild Federal Communications Commission notice Regulatory compliance noticesRegulatory compliance identification numbers FCC rating labelClass B equipment Canadian notice Avis Canadien ModificationsCables European Union regulatory noticeRegulatory compliance notices Japanese notice Bsmi notice Korean notice Vietnam compliance marking notice Ukraine notice Power cord statement for JapanChinese notice Grounding methods to prevent electrostatic discharge Electrostatic dischargePreventing electrostatic discharge Storage array specifications SpecificationsEnvironmental specifications HP contact information Technical supportBefore you contact HP Customer Self RepairRéparation par le client CSR Riparazione da parte del cliente Reparaciones del propio cliente Reparo feito pelo cliente Technical support Technical support Technical support Acronyms and abbreviations Index LED, UID
Related manuals
Manual 86 pages 48.23 Kb Manual 140 pages 588 b

600 specifications

The HP 600 series is an impressive line of powerful and versatile computing solutions, designed to meet the needs of businesses and professionals across various industries. Known for its robust performance and reliable functionality, the HP 600 series is an ideal choice for those seeking efficiency and durability in a compact form.

One of the hallmark features of the HP 600 series is its advanced processing capabilities. Equipped with the latest Intel processors, such as the Intel Core i5 or i7, the series delivers exceptional speed and responsiveness, allowing users to seamlessly juggle multiple applications and tasks. This makes it an excellent option for professionals who rely on software-heavy workflows, such as graphic design, data analysis, and content creation.

The HP 600 series also emphasizes security, a critical factor for businesses concerned about data protection and privacy. With features like HP Sure Start, which automatically detects and mitigates firmware attacks, and HP BIOSphere, ensuring automatic updates to the system’s firmware, the HP 600 series provides strong layers of defense against potential threats. Furthermore, optional Intel vPro technology enhances remote management, making it easier for IT teams to monitor and support devices.

In terms of display quality, the HP 600 series boasts high-definition screens that deliver vibrant visuals and crisp details. This is especially beneficial for design professionals who need accurate color representation. The touch-enabled options available in the series add a layer of interactivity, making it easier to engage with applications and presentations, promoting productivity.

Connectivity is another area where the HP 600 shines. With multiple USB ports, HDMI outputs, and an Ethernet port, users can easily connect to various devices and networks, enhancing collaboration and communication. The inclusion of Wi-Fi 6 technology ensures that users enjoy faster internet speeds and a more reliable connection, essential for today’s fast-paced work environments.

In terms of design, the HP 600 series features a sleek, professional aesthetic that fits well in any office setting. Its durable build quality ensures longevity, standing up to the demands of daily use while maintaining an appealing look.

Overall, the HP 600 series is a well-rounded solution that combines powerful performance, security, and connectivity, making it an ideal choice for professionals and businesses looking to enhance their productivity and efficiency in a highly competitive market. Whether for everyday tasks or more demanding applications, the HP 600 series is poised to deliver exceptional results.
Top Page Image Contents