Printer Control Panel Messages
The following are common printer control panel messages for conditions that will cause the printer to stop working. For a more complete list of messages, see the online user guide, or contact the system administrator.
Control Panel |
|
|
Message | Description | Recommended Action |
|
|
|
|
|
|
41.3 UNEXPECTED | Tray 1 is configured for one | Load the |
PAPER SIZE | media size, but the printer | tray 1 or reconfigure tray 1 for |
LOAD TRAY 1 | detects that a different size | the media size it contains. |
<Type> <Size> | has been fed from tray 1. |
|
| <Type> and <Size> are the |
|
| media type and size |
|
| specified in the printer |
|
| driver or application. |
|
|
|
|
41.3 UNEXPECTED | Tray 1 is configured for a | Load the requested size media |
PAPER SIZE | custom media size, but the | in tray 1. |
LOAD TRAY 1 | printer detects a different |
|
<Width> <Length> | size being fed from the |
|
| tray 1. |
|
| <Width> and <Length> are |
|
| the media width and length |
|
| selected in the application |
|
| or printer driver. |
|
|
|
|
41.5 UNEXPECTED | The printer was expecting | Open and close the front door. |
PAPER TYPE | one type of media to be fed | The printer should feed the |
LOAD TRAY <X> | from an input tray and | page through the printer. Verify |
<Type> <Size> | another type was fed. | that the printer control panel |
|
| configuration and media are |
|
| correct. |
|
|
|
CLEAR DUPLEX JAM | The printer senses a media | See “To clear jams from the |
LOWER LEFT DOOR | jam in the duplex unit. | optional duplexer” on page 46. |
|
|
|
CLEAR FUSER JAM | The printer senses a media | See “To clear jams from the |
LOWER LEFT DOOR | jam in the fuser area. | fuser area” on page 40. |
|
|
|
CLEAR INPUT JAM | The printer senses a media | See “Removing Jammed |
| jam in an input tray | Media” on page 34. |
|
|
|
EN | Control Panel Features 9 |