6On the left side of the fuser, pull down on the green tab, carefully remove any media, and release the tab. Repeated jams in the fuser area indicate that the fuser might be installed improperly. Complete steps 7 through 9 if you experience repeated jams in the fuser area; otherwise, proceed to step 10.
7Press down on the large green lever on the right side of the fuser to ensure that it is in its proper position.
8On each side of the fuser, rotate the blue levers down slightly.
9Rotate the blue levers back up until they snap into place.
10If an optional duplexer was removed from the printer, slide the duplexer back into the printer until it clicks into place.
11Close the lower left door.
EN | Media Jams 41 |