Powersave on, Processing, Copy X of Y, Separator

Control Panel
Message	Description	Recommended Action


POWERSAVE ON	The printer is in power	Clear this message by
	save mode.	pressing any key or by sending
		a print job to the printer.

PROCESSING	The printer is processing a	No action is required.
COPY <X> OF <Y>	proof and print or mopy
	print job.

SEPARATOR	The multi-bin mailbox	Remove all media from the
OUTPUT BIN FULL	output bins are full.	output bins on the multi-bin
		mailbox.

STACKER	The multi-bin mailbox	Remove all media from the
OUTPUT BIN FULL	output bins are full.	output bins on the multi-bin
		mailbox.

STAPLER LOW ON	The Stapler Cartridge has	No action required.
STAPLES	20 to 50 staples remaining.

STKR: ATTACH TO	The device is not attached	Make sure that there is a
PRINTER	to the printer properly.	proper attachment between
		the device and the printer, and
		wait for a solid green status
		light on the user LED on the
		device.

STKR: CLOSE	The Stapler door is open or	Close the Stapler door
STAPLER DOOR	it is not closed properly.	properly.

STKR: DETACH AND	A paper jam occurred in	Clear the paper jam.
CLEAR JAM	the device.

13.xx Paper Jam	A staple jam occurred.	Open the Stapler door, and
alternates with		clear the paper or staple jam.
STKR: DETACH AND
CLEAR STAPLE JAM

STKR: TRAY	The weight capacity of the	Clear the paper from the
OVERLOAD	stacker bin has been	Stacker Bin.
alternates with	reached.
CLEAR PAPER FROM
OPTIONAL BIN 1

EN	Control Panel Features 14

POWERSAVE ON