HP 110 manual Maintain the unit, Clean the exterior case, Clean the glass

Cam.book Page 23 Friday, February 25, 2000 11:32 AM

5

Maintain the unit

This section provides instructions for keeping your unit in top working condition. Perform the maintenance procedures as necessary.

CAUTION	Turn off the unit and unplug the power cord before cleaning. Even though the
	unit is off, power is still being supplied if the cord is plugged in.

Clean the exterior case

Use a soft, damp, lint-free cloth to wipe dust, smudges, and stains off the case. The interior of the unit does not require cleaning. Keep fluids away from the interior of the unit as well as the front panel.

Clean the glass

Dirty glass (fingerprints, smudges, a hair, and so on) slows down performance by as much as half a minute and affects the accuracy of special features such as Fit to Page and Clone. This is because the unit is actually processing the smudges on the glass. Keep the glass clean.

1Turn off the unit, unplug the power cord, and raise the lid.

2Clean the glass with a soft cloth or sponge slightly moistened with a nonabrasive glass cleaner.

CAUTION	Do not use abrasives, acetone, benzene, or carbon tetrachloride on the glass;
	these can damage it. Do not place liquids directly on the glass. They may seep
	under it and damage the unit.

3Dry the glass with a chamois or cellulose sponge to prevent spotting.

Chapter 5—Maintain the unit 23