Vertical portrait position, and you turned your letter

Cam.book Page 33 Friday, February 25, 2000 11:32 AM

		HP Color Copier

Message	What You Should Do


Next time, place originals in	You placed your legal-size originals in the ADF in the
same direction in feeder. Press	vertical (portrait) position, and you turned your letter-
Enter to continue.	or A4-size originals sideways. When copying a mixture,
	place them vertically in the ADF. For more
	information, see “Process legal- or mixed-size
	originals.”

Legal size supports only black	You tried to make a color copy of a legal-size original.
copy, reduction allowed. Press	Your unit only supports black-and-white copying of
Enter to continue.	legal-size originals. Press ENTER, and then press
	START COPY-Black.

Reload document, and then	Your unit cannot load the original from the ADF.
restart job.	Remove the original, make sure it does not have any
	staples, paper clips, or bent edges, and make sure that
	it is of a recommended paper type. Reload the original
	in the ADF, and then restart the job.

Memory full; press Enter.	There is probably a paper jam. Clear the jam. For more
	information, see “Clear a paper jam.”

Press Enter to align cartridges.	If you have installed new print cartridges or removed
	and reinserted a cartridge, you must align them to
	ensure excellent print quality. After you insert a
	cartridge, press ENTER.

Out of paper: Load paper, and	Do you have paper in the input tray? Load paper, and
then press Enter.	make sure there is only one type of paper in the input
	tray.
	Is the back door off? If you removed the back door to
	clear a paper jam, replace it.

Paper jam: Clear jam, and then	Paper is jammed in the unit. Clear the jam. For more
press Enter.	information, see “Clear a paper jam.”

Error: Incorrect [black or	• Did you install the correct cartridge? You may have
color] cartridge installed.		installed the wrong type of print cartridge. Remove
		it, and replace it with the correct type of cartridge.
		For more information, see “Order print cartridges.”
	•	Is the print cartridge installed correctly? One or
		both of the print cartridges is not installed or is
		installed incorrectly. Remove and reinsert the
		cartridges, making sure to snap them into their
		holders.
	•	Did you remove the protective tape from the print
		cartridge? Gently remove both the green pull tab
		and blue tape covering the nozzles on the print
		cartridge.

Chapter 6—Troubleshoot your unit

vertical (portrait) position, and you turned your letter-