Cam.book Page 10 Friday, February 25, 2000 11:32 AM
HP Color Copier
Load originals on the glass
You can process any original by placing it on the glass.
1Lift the lid, and make sure that the glass is clean.
For more information, see “Clean the glass.”
2Place the original face down on the glass with the top edge along the green border, and align the
If you are copying a photo, place the short edge of the photo along the green border, and align the corner of the photo with the top of the white arrow and the end of the green border.
If you are copying from a transparency (that is, your original is printed on transparency film), place a blank piece of paper on top of the transparency.
Top edge of original
3Close the lid.
Load originals in the automatic document feeder (ADF)
When using the ADF, be aware of the following:
•To prevent paper jams, use
•To avoid a paper jam, do not load colored originals printed on a color laser printer, photos or photo papers, transparency film, labels, envelopes, or
•You can load a maximum of 30 originals at a time when using letter- or
10 | Chapter |