HP AUTOMATIC XT SPAY GUNS 311051D manual Dimensions

Page 34

Dimensions

Dimensions

2.0 in. (50.8 mm)

TI8104a

3.86 in. (98.0 m)

5.3 in. (134.6 mm) 6.41 in. (162.81 mm) with fluid control knob

3.0 in.

(76.2 mm)1.395 in.

(35.43 mm)

0.5 in. (12.7 mm)

mounting hole

TI8181a

2.76 in. (70.1 mm)

Part No. 249407 Gun Shown

FIG. 28

34

311051D

Image 34

Contents Automatic XT Spray Guns Contents Related ManualsOrifice Size In. mm ModelsCompliant Airspray Equipment Misuse Hazard Toxic Fluid or Fumes Hazard Selection Charts Hvlp Spray Gun AssembliesCompliant Spray Gun Assemblies Airspray Gun AssembliesGun Selection Proper Needle/Nozzle SelectionAir Caps Air Flow Hvlp Gun Air Cap PressureConfigure Gun and Manifold InstallationVentilate Spray Booth Non-circulating SystemInstall Air Fittings Ground SystemRetrofit Adapter Plate Mount GunReciprocating Arm Rod Mount Stationary SupportConnect Air Line SetupConnect Fluid Hose Flush Spray Gun Position Air CapAdjust Spray Pattern Compliant Hvlp and Compliant Gun LimitsAir Pressure Regulator Apply Fluid Pressure Relief ProcedureOperation IncorrectDaily Gun Care Clean and Flush Gun General System MaintenancePerform Pressure Relief Procedure, General Troubleshooting TroubleshootingProblem Cause Solution Troubleshooting Spray Pattern Troubleshooting Items Needed for Service ServiceReplace Fluid Packings and Air Seals Alternate Fluid Control Shown Reassembly Parts Exploded View Part No Gun ShownPart No. Description Qty PartsAir Caps Orifice Size LargeSpray Gun Assemblies all models Manifold with Bottom Fluid Ports Description Qty Manifold with Side Fluid PortsSide Fluid Ports and Fan Adjustment Valve RING, Ptfe Accessories Dimensions Mounting Hole Layout Manifold Mounting Hole LayoutRear Port Manifold Retrofit Adapter Plate Gun with RetrofitTechnical Data Triggering SpeedGraco Standard Warranty Graco Information