HP A.06.11 manual Paths and devices for tapes, Mode=Autoreply

Page 28

4.Run the SYSGEN utility, IO subsystem:

:SYSGEN

SYSGEN>IO

For a SCSI tape library (DLT) device, add:

•The path and device for autochanger:

IO>PATH PATH=56/52.0 ID=PSEUDO

IO>ADEV LDEV=30 PATH=56/52.0.0 ID=PICKER

•Paths and devices for tapes:

IO>APATH PATH=56/52.2 ID=PSEUDO

IO>ADEV LDEV=31 PATH=56/52.2.0 ID=DLT8000

MODE=AUTOREPLY

IO>APATH PATH=56/52.3 ID=PSEUDO

IO>ADEV LDEV=32 PATH=56/52.3.0 ID=DLT8000

MODE=AUTOREPLY

The MAPPER utility lists the path number (for example, PATH=56/52.0) and the device ID (use the first word from Component Name, for example ID=DLT8000).

The LDEV number is any free number from 1-255. You can check already used numbers by listing all devices with SYSGEN, IO subsystem, or the showdev command:

:SYSGEN

SYSGEN>IO

IO>LDEV

:SHOWDEV

The path address for autochanger is usually the path address for tape +1.

5.For path number (PATH=56/52.0-PATH=56/52.0.0) from MAPPER utility, for ID use the first word from Component Name (ID=DLT8000), for autochanger use PICKER (ID=PICKER) and for LDEV numbers use any free number from 1-255.

NOTE:

For SCSI devices, use PSEUDO as the device identifier.

28	MPE/iX system user guide

Image 28

Contents HP Data Protector A.06.11 MPE/iX system user guide Page Contents Index Figures Tables Edition history Part number Guide edition ProductPublication history Intended audience Documentation setGuides Other documents and online Help provide related informationHP Data Protector disaster recovery guide HP Data Protector integration guide for HP Reporter Online Help This guide fulfills a similar function for Media OperationsAbbreviations Documentation mapGuide Map Abbreviation GuideIntegrations Integration Guide Document conventions Document conventions and symbolsConvention Element Provides additional information Data Protector graphical user interfaceProvides helpful hints and shortcuts General information HP technical support Data Protector graphical user interfaceSubscription service HP websitesDocumentation feedback For additional information, see the following HP websitesConfiguring the integration IntroductionIntegration concepts PrerequisitesConfiguring devices Configuring standalone devicesBefore you begin Connect a device to the systemO configuration standalone device Run the Sysgen utility, IO subsystem Autochanger robotics device and identify it as Picker Ioadev LDEV=31 PATH=52.3.1 ID=PICKERKeep the new configuration and exit Sysgen Configuring Scsi tape librariesCreate a device link file using mknod O configuration Scsi tape library At the ISL prompt, enterPaths and devices for tapes MODE=AUTOREPLYTurboSTORE/iX supports two backup types BackupBackup types List of backup variables User-definable backup variablesVariable Value Description Setting Backup Variables Specifying backup options TurboSTORE/iX backup options Full system backupClick Add to add the new variable to the list Restore Creating SLTCreating Store Tapes To create a SLT, runSetting Restore Variables User-definable restore variablesList of restore variables TurboSTORE/iX restore options Click OK to apply the settingsPre- and post-exec commands Disaster recoveryShell script can contain commands for job streaming ExampleRecovery Procedure Supported CLI commandsData Protector A.06.11 supports the omnib command Backup and restore of MPE/iX database TurboSTORE/iX log files Example 1. TurboSTORE/iX log files with OnlineTo create a UDC file, enter the following in command prompt UDC files and environment variablesUDC files Example 2. TurboSTORE/iX log files with ONLINE=STARTExample OB2SET fileTo activate the UDC file enter Index