HP 410 Copier Load originals and load paper, Load originals on the glass, Copy from the glass

3

load originals and load paper

You can copy originals loaded on the glass or in the automatic document feeder. You can also copy onto a variety of paper types, weights, sizes, and transparency films. It is important, however, that you choose the right paper and make sure that it is loaded correctly and not damaged.

load originals

Your HP Digital Copier Printer provides two ways to load originals:

•load originals on the glass

•load originals in the automatic document feeder

load originals on the glass

You can copy up to letter or A4-sized originals by placing them on the glass.

Tip: If you want to copy a legal-sized document you must load it in the automatic document feeder (ADF). For more information, see load originals in the automatic document feeder on page 6.

Note: Many of the Special Features options, such as Image Size or Poster, will not work correctly if the glass and lid backing are not clean. For more information, see clean the glass and clean the document backing on page 21.

copy from the glass:

1Lift the lid and place the original face down on the glass in the front-right corner with the sides of the originals touching the right and bottom edges.

Tip: If you are copying from a transparency (that is, your original is printed on transparency film), place a blank piece of paper on top of the transparency.

Top edge of original

2Close the lid.

5