HP 2533t Mobile manual Buttons and switches, Off If the computer is plugged into an external

Page 13

Component

Description

 

 

 

 

(6)

Volume mute light

Turquoise: Computer sound is on.

 

 

Amber: Computer sound is off.

 

 

 

 

(7)

Battery light

Amber: A battery is charging.

 

 

Turquoise: A battery is close to full charge capacity.

 

 

Blinking amber: A battery that is the only available

 

 

 

power source has reached a low battery level.

 

 

 

When the battery reaches a critical battery level, the

 

 

 

battery light begins blinking rapidly.

 

 

Off: If the computer is plugged into an external

 

 

 

power source, the light turns off when all batteries

 

 

 

in the computer are fully charged. If the computer is

 

 

 

not plugged into an external power source, the light

 

 

 

stays off until the battery reaches a low battery

 

 

 

level.

 

 

 

(8)

Drive light

Blinking: The flash drive or optional optical drive is being

 

 

accessed.

*The 2 power lights display the same information. The light on the power button is visible only when the computer is open. The power light on the front of the computer is visible whether the computer is open or closed.

The 2 wireless lights display the same information. The light on the wireless button is visible only when the computer is open. The wireless light on the front of the computer is visible whether the computer is open or closed.

Buttons and switches

Component

Description

 

 

 

(1)

Power button

When the computer is off, press the button to turn

on the computer.

When the computer is on, press the button to turn off the computer.

When the computer is in Standby, press the button briefly to exit Standby.

Identifying the hardware

3

Image 13
Contents HP 2533t Mobile Thin Client Product notice Safety warning notice Iv Safety warning notice Table of contents Pointing devices and keyboard Multimedia Modem and LAN Drives Appendix a Routine care Top components Identifying the hardwarePointing devices Component Description LightsOff If the computer is plugged into an external Buttons and switchesKeys Adjust Power PropertiesFn key DisplayFront components Right-side components Left-side components Components Description Rear componentsBottom components Wireless antennas Identifying the labels Commit Enhanced Write Filter EWFEnable DisableSelect Start Run AllDescription CommitanddisableGauge Using the Enhanced Write Filter EWF utility Using the Enhanced Write Filter EWF status utility Local drives ConfigurationDrive Z Drive CSaving files Click Reconnect at LoginMapping network drives Roaming profilesCreating a new user account User accountsCreating user profiles Page Remote Desktop Connection ApplicationsTeemNT Terminal Emulation HP Virtual Client EssentialsHP Remote Graphics Software RGS HP Session Allocation Manager SAMPage Select Start Control Panel HP ThinState Capture HP ThinState CaptureHP ThinState Deploy Microsoft Internet Explorer Pointing devices and keyboard Using pointing devicesDisplaying system information fn+esc Using hotkeysViewing battery charge information fn+f8 Switching the screen image fn+f4Initiating Standby fn+f3 Decreasing screen brightness fn+f9Using the HP Quick Launch Buttons Displaying the Q Menu Accessing the Quick Launch Buttons control panelUsing the embedded numeric keypad Using the keypadsEnabling and disabling the embedded numeric keypad Switching key functions on the embedded numeric keypad Using an optional external numeric keypadPower control and light locations PowerProperties Shutting down the computerUsing power-saving states Setting power optionsInitiating and exiting Standby Select Start Turn Off Computer Turn OffSetting password protection upon exiting Standby Using battery powerDisplaying the remaining battery charge Inserting or removing the battery Charging a battery Conserving battery power Managing low battery levelsIdentifying low battery levels Resolving a low battery levelDisposing of a used battery Storing a batteryConnecting the AC adapter Using external AC powerPlug the other end of the power cord into an AC outlet Power Using the audio features Using multimedia hardwareMultimedia Using the audio-out headphone jack Using the audio-in microphone jackAdjusting the volume Using the external monitor port Using the video featuresOpening preinstalled multimedia software Using multimedia softwareUsing multimedia software Preventing playback disruptionsObserving the copyright warning Changing DVD region settingsSelect Start My Computer About integrated wireless devices WirelessUsing wireless controls Using WlanSetting up a Wlan Using wireless security features Connecting to a WlanIdentifying a Wlan device Select Start HP System InformationConnecting a modem cable Using a modemModem and LAN Connecting a country- or region-specific modem cable adapter Viewing the current location selection Selecting a location settingAdding new locations when traveling Check the telephone line type Solving travel connection problemsCheck for pulse or tone dialing Set the modem to ignore dial tonesClear the check box for Wait for dial tone before dialing Connecting to a local area networkProtecting the computer SecuritySetting passwords in Windows Using passwordsUsing administrator and user passwords Automatic logonUsing a setup password Setting passwords in Computer SetupAdministrator logon Manual logonManaging a setup password Using a power-on passwordEntering a setup password Entering a power-on password Managing a power-on passwordRequiring a power-on password at restart Configuring Microsoft Windows Firewall Using Microsoft Windows FirewallTroubleshooting applications Gathering configuration informationIdentifying failure symptoms Adding exceptionsAdding a port Adding a programClick Add Port Installing a security cable Using a USB device Hardware upgradesConnecting a USB device Using the USB Storage Options utility Using the expansion portRemoving a USB device Securing USB portsInserting and removing a PC Card Using PC CardsPage Inserting a digital card Using SD Card Reader cardsRemoving a digital card Adding a printer Adding printers using a text-only print driverSelect Start Printers and Faxes Click Add a printer Click Use the Following PortUsing manufacturer print drivers Drives Identifying installed drivesHandling drives Inserting an optical disc CD or DVD Using optical drives select models onlyRemoving an optical disc CD or DVD When the disc tray opensWhen the disc tray does not open Page Using optional external devices Using external drivesUsing an optional external MultiBay or external MultiBay Memory modules Page Page Page About the boot order device MultibootEnabling boot devices in Computer Setup Considering boot order changes Setting a new boot order in Computer Setup Choosing Multiboot preferencesChoosing a boot device using the F9 prompt Starting Computer Setup Computer SetupNavigating and selecting in Computer Setup Using Computer SetupRestoring factory settings in Computer Setup Diagnostics menu Computer Setup menusFile menu Security menuSystem Configuration menu Cleaning the keyboard Cleaning the displayRoutine care Traveling and shippingPage USB IndexJacks Passwords SAM
Related manuals
Manual 112 pages 10.06 Kb Manual 116 pages 42.21 Kb Manual 3 pages 25.35 Kb Manual 80 pages 44.65 Kb Manual 18 pages 18.88 Kb